Read Panasonic KV-S3105C / KV-S3085 (serv.man3) Service Manual online
Classified Code
Error Code
Possible Cause
Check point
F60:
Front side gain error
Front side gain error
50 00 00 00
Front side gain error occurs.
1.
Check front side lamp lights properly.
2.
Check front side lamp is installed to front
side Lamp module properly.
side Lamp module properly.
3.
Execute CCD Test in Test Mode.
Amp value is changing during this test?
Amp value is changing during this test?
4.
Confirm each cable and connector
condition as follows.
condition as follows.
a.
Between the front side lamp and CN2
on LAMP INVERTER Board
on LAMP INVERTER Board
b.
Between CN1 on the LAMP INVERTER
Board and CN2026 on MOTHER Board
Board and CN2026 on MOTHER Board
c.
Between Front Side Optical Unit and
CN2005 on the MOTHER Board
CN2005 on the MOTHER Board
d.
Between Front Side Optical Unit and
CN2002 on the MOTHER Board
CN2002 on the MOTHER Board
e.
Between Front Side Optical Unit and
CN1002 on CONTROL Board
CN1002 on CONTROL Board
5.
Check input level (Test pins: TPFRO,
TPFRE, TPFGO, TPFGE, TPFBO, and
TPFBE on the CONTROL Board)
TPFRE, TPFGO, TPFGE, TPFBO, and
TPFBE on the CONTROL Board)
→ See Note.
6.
Replace faulty cables.
7.
Replace the front side lamp.
8.
Replace the front lamp module.
9.
Replace the LAMP INVERTER Board.
10. Replace front side optical unit.
11. Replace the CONTROL Board.
F62:
Back side gain error
Back side gain error
52 00 00 00
Back side gain error occurs.
1.
Check back side lamp lights properly.
2.
Check back side lamp is installed to back
side lamp module properly.
side lamp module properly.
3.
Execute CCD Test in Test Mode.
Amp value is changing during this test?
Amp value is changing during this test?
4.
Confirm each cable and connector
condition as follows.
condition as follows.
a.
Between the back side lamp and CN3
on LAMP INVERTER Board
on LAMP INVERTER Board
b.
Between CN1 on the LAMP INVERTER
Board and CN2026 on MOTHER Board
Board and CN2026 on MOTHER Board
c.
Between Back Side Optical Unit and
CN2004 on the MOTHER Board
CN2004 on the MOTHER Board
d.
Between Back Side Optical Unit and
CN2002 on the MOTHER Board
CN2002 on the MOTHER Board
e.
Between Back Side Optical Unit and
CN1003 on CONTROL Board
CN1003 on CONTROL Board
5.
Check input level (Test pins: TPBRO,
TPBRE, TPBGO, TPBGE, TPBBO, and
TPBBE on the CONTROL Board).
TPBRE, TPBGO, TPBGE, TPBBO, and
TPBBE on the CONTROL Board).
→ See Note.
6.
Replace faulty cables.
7.
Replace the back side lamp.
8.
Replace back lamp module.
9.
Replace the LAMP INVERTER Board.
10. Replace back side optical unit.
11. Replace the CONTROL Board.
115
KV-S3105CSERIES / KV-S3085SERIES
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man3) service manuals if exist.