Read Panasonic KV-S3105C / KV-S3085 (serv.man3) Service Manual online
Classified Code
Error Code
Possible Cause
Check point
F56:
Exit (Rear) sensor error
Exit (Rear) sensor error
46 00 00 00
Exit (Rear) sensor error occurs.
1.
To confirm the exit (Rear) sensor operates
properly, execute Document Sensor Test
in Test Mode.
properly, execute Document Sensor Test
in Test Mode.
2.
Remove paper dust around the sensor.
3.
Confirm each cable and connector
condition as follows.
condition as follows.
a.
Between the exit (Rear) sensor and
CN6015 on POINTER Board
CN6015 on POINTER Board
b.
Between CN6016 on the POINTER
Board and CN2011 on MOTHER Board
Board and CN2011 on MOTHER Board
c.
Between CN1001 and CN2001
4.
1
st
pin on the CN6015: More than 4.5 V
(DC)?
5.
Replace the exit (Rear) sensor.
6.
Replace the POINTER Board.
7.
Replace the MOTHER Board.
8.
Replace CONTROL Board.
F57:
Edge limit [R] sensor error
Edge limit [R] sensor error
48 00 00 00
Edge limit [R] sensor error occurs.
1.
To confirm the edge limit [R] sensor
operates properly, execute Document
Sensor Test and Sensor Sensitive Level
in Test Mode.
operates properly, execute Document
Sensor Test and Sensor Sensitive Level
in Test Mode.
2.
Remove paper dust around the sensor.
3.
Confirm each cable and connector
condition as follows.
condition as follows.
a.
Between CN6023 on SKEW [R] Board
and CN6010 on RELAY [UPPER]
Board
and CN6010 on RELAY [UPPER]
Board
b.
Between CN6012 on the RELAY
[UPPER] and CN2014 on MOTHER
Board
[UPPER] and CN2014 on MOTHER
Board
c.
Between CN1001 and CN2001.
4.
3
rd
pin on the CN6023: More than 4.5 V
(DC)?
5.
Replace the SKEW [R] Board.
6.
Replace the RELAY [UPPER] Board.
7.
Replace the MOTHER Board.
8.
Replace CONTROL Board.
F58:
Edge limit [L] sensor error
Edge limit [L] sensor error
49 00 00 00
Edge limit [L] sensor error occurs.
1.
To confirm the edge limit [L] sensor
operates properly, execute Document
Sensor Test and Sensor Sensitive Level
in Test Mode.
operates properly, execute Document
Sensor Test and Sensor Sensitive Level
in Test Mode.
2.
Remove paper dust around the sensor.
3.
Confirm each cable and connector
condition as follows.
condition as follows.
a.
Between CN6020 on SKEW [L] Board
and CN6010 on RELAY [UPPER]
Board
and CN6010 on RELAY [UPPER]
Board
b.
Between CN6012 on the RELAY
[UPPER] Board and CN2014 on
MOTHER Board
[UPPER] Board and CN2014 on
MOTHER Board
c.
Between CN1001 and CN2001
4.
5
th
pin on the CN6020: More than 4.5 V
(DC)?
5.
Replace the SKEW [L] Board.
6.
Replace the RELAY [UPPER] Board.
7.
Replace the MOTHER Board.
8.
Replace CONTROL Board.
114
KV-S3105CSERIES / KV-S3085SERIES
Click on the first or last page to see other KV-S3105C / KV-S3085 (serv.man3) service manuals if exist.