Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
36
8.5.
Lower Chassis 2
8.5.1.
Bottom Plate
8.5.2.
Platen Motor
8.5.3.
FAN
8.5.4.
Power Supply
8.5.5.
CONTROL Board
(1) Remove the Back Cover.
(See 8.2.5. Back Cover)
(2) Remove the screw A and the USB Earth Plate with the wire.
(3) Remove the 7 screws C.
(4) Remove the 2 screws F.
(5) Remove the Bottom Plate.
(3) Remove the 7 screws C.
(4) Remove the 2 screws F.
(5) Remove the Bottom Plate.
Reassembling Note:
Install the Bottom Plate with screws C and F first and then
install the USB Earth Plate and wire with screw A.
Otherwise the USB Earth Plate may not contact with the
USB jack on the Control Board correctly.
install the USB Earth Plate and wire with screw A.
Otherwise the USB Earth Plate may not contact with the
USB jack on the Control Board correctly.
F
A
USB Earth Plate
Bottom Plate
C
(1) Remove the Bottom Plate.
(See 8.5.1. Bottom Plate)
(2) Remove the CONTROL Board.
(See 8.5.5. CONTROL Board)
(3) Remove the Polyslider and Gear.
(4) Remove the screw C.
(5) Remove the Platen Motor with Motor Plate.
(6) Remove the 2 screws G and remove the Platen Motor from
(4) Remove the screw C.
(5) Remove the Platen Motor with Motor Plate.
(6) Remove the 2 screws G and remove the Platen Motor from
the plate.
(7) Disconnect the connector.
Reassembling Note:
Check the mounting position of the gear.
(See 8.4.3. Reference Plate (B))
Control Board
C
Platen Motor
G
Motor Plate
G
Gear
Polyslider
Connector
(1) Remove the Bottom Plate.
(See 8.5.1. Bottom Plate)
(2) Remove 2 screws E.
(3) Disconnect the connector on the CONTROL Board.
(4) Remove the FAN.
(3) Disconnect the connector on the CONTROL Board.
(4) Remove the FAN.
(1) Remove the Bottom Plate.
(See 8.5.1. Bottom Plate)
(2) Remove the 2 screws C.
(3) Remove the Power Supply.
(4) Disconnect the connector from the CONTROL board on the
(3) Remove the Power Supply.
(4) Disconnect the connector from the CONTROL board on the
Power Supply.
(1) Remove the Bottom Plate.
(See 8.5.1. Bottom Plate)
(2) Disconnect all connectors (7 cable connectors and 4 FFC
cables) to CONTROL Board.
(3) Remove the CONTROL Board.
Power Supply
FAN
C
Control Board
E
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.