KV-N1058X, KV-N1028X, KV-N1058Y, KV-N1028Y - Panasonic Other Service Manuals Service Manual (repair manual). Page 40

40

According to the following, wipe off the dirt from the surface of each part and replace Limited Life Parts to maintain the performance
of the scanner.

C: Clean each of the following parts every 8,000 sheets scanned.
R: Replace rollers (Paper Feed, DFP) every 250,000 sheets scanned. 

• PC will notify users of cleaning and replacement timing when running the utility software after Clean or Replace Roller Counter

reaches the Clean or Replace Roller Timing (Default setting: Cleaning cycle 8,000, Exchange cycle 250,000).

• The maintenance schedule was determined according to paper standards (A4: 80 g/m² / Letter: 20 lb.), which can vary greatly

between users. Therefore, the schedule may vary depending on usage conditions. As a countermeasure, scanner counter of
setting value (maintenance cycle) can be changed. How to set the scanner counter, please refer to Chapter 10.

• Please refer to the 16 Appendix (Operating manual P.10) for the Roller Cleaning Paper.

Refer to the concerned pages of Operating Manual (See 16. Appendix (Operating Manual P.94).)

Refer to the concerned pages of Operating Manual (See 16. Appendix (Operating Manual P.105).)

KV-SS061 

Clean each part 
every 8(x 1000) 
Sheets 
scanned.

After cleaning the Paper Feed and DFP 
Rollers, execute "Clear Counter" for 
cleaning roller with Service Utility. 
After replacing the rollers, execute "Clear 
Counter" for replacing roller. 
(See Scanner Condition (

Paper Feed Roller

C

C

C

C

R

DFP Roller

C

C

C

C

R

Conveyor Roller

C

C

C

C

-

Exit Roller

C

C

C

C

-

Free Rollers

C

C

C

C

-

Scanning glass (F)

C

C

C

C

- Clean each scanning 

Scanning glass (B)

C

C

C

C

-

Double Feed Detector 
(Generator)

C

C

C

C

- Sweep the dirt off the 

Double Feed Detector 
(Receive) 

C

C

C

C

-