Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
34
8.4.5.
Side Plate Assembly
8.4.6.
Conveyor Roller
(1) Remove the Back Cover.
(See 8.2.5. Back Cover)
(2) Remove the screws A and the Earth Plate with the wire.
(3) Remove the 2 screws C and the Side Plate Assembly.
(3) Remove the 2 screws C and the Side Plate Assembly.
Reassembling Note:
a. When installing the Side-Plate Assembly, make sure to
position the Idle Pulley of the assembly.
Assemble the pulley to outside of the Conveyor Belt 2.
Assemble the pulley to outside of the Conveyor Belt 2.
b. After installing the Side-Plate Assembly, adjust the belt
tension as follows.
(1) Loosen Spring Plate Screw. (Proper belt tension will
(1) Loosen Spring Plate Screw. (Proper belt tension will
be adjusted by elastic force of the spring.)
(2) Tighten the screw. (See the right illustration.)
(1) Remove the Side Plate Assembly and Conveyor Belt 2.
(See 8.4.5. Side Plate Assembly)
(2) Pull the Pulley (arrow
2
), while unlocking the hook (arrow
1
)
and remove the Pulley.
Reassembling Note:
After reassembling the Pulley, be sure to check that the
Pulley is locked to the Conveyor Roller by pulling the Pulley.
Pulley is locked to the Conveyor Roller by pulling the Pulley.
(3) Slide and remove the bearing from the Conveyor Roller
(arrow
3
).
(4) Open and remove the Feed Roller Cover.
(5) Unlock the hook of the Conveyor Roller Bearing (arrow
(5) Unlock the hook of the Conveyor Roller Bearing (arrow
4
)
(6) Unlock the Conveyor Roller by turning the Conveyor Roller
Bearing (arrow
5
),
(7) Slide the Conveyor Roller with the Conveyor Roller Bearing
(arrow
6
) and remove it (arrow
7
).
(8) Remove the Support Bearing.
(9) Remove the Polyslider.
(10) Remove the Conveyor Roller Bearing from the Conveyor
(10) Remove the Conveyor Roller Bearing from the Conveyor
Roller.
Idle Pulley
Conveyor Belt 2
tension
C
A
Earth Plate
Side Plate Assembly
C
Spring Plate Screw
Bearing
Pulley
Conveyor
Roller
Roller
Hook
1
2
3
Feed Roller
Cover
Cover
Conveyor Roller
Conveyor
Roller
Bearing
Roller
Bearing
Support
Bearing
Bearing
4
6
5
7
Conveyor Roller Bearing
Support Bearing
Polyslider
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.