Read Panasonic SR-PE55LTQ Service Manual online
11
6.4 Simple Test for Control Panel Confi rmation
(Before fault diagnosis, conduct the simple test for control panel confirmation as below and check whether the
control panel (whole) can run normally.) Confi rm whether the control panel suffers no fault and whether each key-
press operation is normal based on the following steps. Then judge whether the control panel (whole) can function
normally (excluding the temperature performance for cooking and thermal insulation). In case of any abnormity,
please diagnose the fault as per the Fault Diagnosis Table.
control panel (whole) can run normally.) Confi rm whether the control panel suffers no fault and whether each key-
press operation is normal based on the following steps. Then judge whether the control panel (whole) can function
normally (excluding the temperature performance for cooking and thermal insulation). In case of any abnormity,
please diagnose the fault as per the Fault Diagnosis Table.
1.
Insert the special power line of the body into the power
plug, and press three buttons, namely “Keep Warm”,
“Appointment” and “Power On”.
plug, and press three buttons, namely “Keep Warm”,
“Appointment” and “Power On”.
य़
䗝ᢽ
䗝ᢽ
㉇佁
㙝㉏
㊭㉇
剐㉏
剡剐
偼༈∸
䈚䐘ㄟ
㉹
݇
ֱ⏽
乘㑺
ᓔ
ᯊ䯈䆒ᅮ
SR-PE55
䕙ࡽ
⛍伾
⛍伾
Off
Keep Warm
Timer
Start
偼༈∸
䈚䐘ㄟ
剐㉏ 剡剐
㉹
㊭㉇
㙝㉏
㉇佁
Ԣ
Ё
催
乘㑺
⛍䇗
ߚৢ
ᇣᯊ
2.
If various segments of the LCD screen are lit as shown in
the right diagram, it indicates normal operation. (releasing
all the 3 keys can exit from the state.)
the right diagram, it indicates normal operation. (releasing
all the 3 keys can exit from the state.)
偼༈∸
䈚䐘ㄟ
剐㉏ 剡剐
㉹
㊭㉇
㙝㉏
㉇佁
Ԣ
Ё
催
乘㑺
⛍䇗
ߚৢ
ᇣᯊ
3.
If releasing all the 3 keys, the buzzer will sound once, the
LCD screen will display the situation as shown in the right
diagram, the indicator light of “Power On” will be lit and the
heater will begin to work.
LCD screen will display the situation as shown in the right
diagram, the indicator light of “Power On” will be lit and the
heater will begin to work.
The heater will become hot.
Please take care not to be
burned.
Please take care not to be
burned.
Warning
偼༈∸
䈚䐘ㄟ
㙝㉏
Ԣ
催
乘㑺
ߚৢ
4.
Operate other keys and confi rm whether they are in normal
condition, then press the “Power Off” key.
condition, then press the “Power Off” key.
य़
䗝ᢽ
䗝ᢽ
㉇佁
㙝㉏
㊭㉇
剐㉏
剡剐
偼༈∸
䈚䐘ㄟ
㉹
݇
ֱ⏽
乘㑺
ᓔ
ᯊ䯈䆒ᅮ
SR-PE55
䕙ࡽ
⛍伾
⛍伾
Off
Keep Warm
Timer
Start
偼༈∸
䈚䐘ㄟ
剐㉏ 剡剐
㉹
㊭㉇
㙝㉏
㉇佁
Ԣ
Ё
催
乘㑺
⛍䇗
ߚ
Check the above operations from 1 to 4, and if they functions normally, it can be judged that the control panel (whole)
works normally.
works normally.
IP4749_SR_PE45_PE55_Eng_07_140314.indd 11
IP4749_SR_PE45_PE55_Eng_07_140314.indd 11
2014-3-14 9:12:39
2014-3-14 9:12:39
Click on the first or last page to see other SR-PE55LTQ service manuals if exist.