Read Panasonic SR-PE55LTQ Service Manual online
SR-PE55
Electronic Pressure Cooker
SR-PE45
Warnning
֢ݗ
ߛუ
گუ
گუ
ഽ
ዐ
ෑ
ዐ
ෑ
ࠀీስ
უ૰ስ
࿔आዳ
้क़ยۨ
10
ݴ
1
ݴ
ԍ࿒
࠲
ਸ
There are special components used in this equipment which are important for safety. These parts are marked
by
by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is
essential that these critical parts should be replaced with manufacturer’s specifi ed parts to prevent shock, fi re or
other hazards. Do not modify the original design without permission of manufacturer.
other hazards. Do not modify the original design without permission of manufacturer.
Important Safety Notice
Contents
1.Maintenance Safety Instructions .............................. 2
2.Specifi cations ........................................................... 3
3.Component Identifi cation .......................................... 4
4.Operation Procedure ................................................ 5
5.Test Mode ................................................................. 7
6.Fault Diagnosis Methods .......................................... 9
2.Specifi cations ........................................................... 3
3.Component Identifi cation .......................................... 4
4.Operation Procedure ................................................ 5
5.Test Mode ................................................................. 7
6.Fault Diagnosis Methods .......................................... 9
7.Disassembly and Assembly Instructions ................ 14
8.Wiring Diagram ....................................................... 20
9.Circuit Diagram ..................................................23-24
10.Location of Parts • Parts List ................................ 25
11.Replacement Part List (HK) .................................. 27
12.Replacement Part List (RUS) ............................... 29
8.Wiring Diagram ....................................................... 20
9.Circuit Diagram ..................................................23-24
10.Location of Parts • Parts List ................................ 25
11.Replacement Part List (HK) .................................. 27
12.Replacement Part List (RUS) ............................... 29
IP4749_SR_PE45_PE55_Eng_05_131230.indd 1
IP4749_SR_PE45_PE55_Eng_05_131230.indd 1
2013-12-30 11:31:06
2013-12-30 11:31:06
SR-PE55
(HK)
(HK)
(RUS)
ORDER NO HMK1302064CE
2
1. Maintenance Safety Instructions
To avoid accidents in maintenance and ensure safe use of maintained products, please observe the following precautions.
1.1 The following signs indicate the degree classification of the damages or
risks incurred due to neglect of the contents requiring attention, and provide
relevant instructions.
Warning
The list of the sign means [may cause serious injury or even death.
Note
The list of the sign means [may cause damage or object damage only.
1.2 The following graphic symbols indicate different categories of the indicative
contents and provide relevant instructions.
(llustrations are shown as below.)
This symbol indicates attention—“Take Care”
This symbol indicates something that should not be done—“Avoid”
This symbol indicates it is mandatory to “Observe Instructions Strictly”
■ Please observe the precautions.
The matters requiring special attention in the course of maintenance must be indicated on the labels and
seal strips of housing, bottom frame and component, etc. Please observe these precautions as seriously
as observing the operation manual.
seal strips of housing, bottom frame and component, etc. Please observe these precautions as seriously
as observing the operation manual.
■ Electric Shock.
Electric
shock
hazard
As the control panel carries AC 220V, if you touch any live component of it, there may be an electric
shock. Thus, please wear insulating gloves in power-on maintenance or while removing the component
to be replaced to avoid electric shock.
shock. Thus, please wear insulating gloves in power-on maintenance or while removing the component
to be replaced to avoid electric shock.
■ Please use the original components for maintenance.
Components of this appliance feature flame retardance, voltage withstanding and other safety
characteristics, thus please use components with the same characteristics in case of replacement.
Especially for the critical safety components with the mark of
characteristics, thus please use components with the same characteristics in case of replacement.
Especially for the critical safety components with the mark of
indicated in the circuit diagram and the
component list, please DO use the original components.
■ Please install and wire components as before.
For safety, this product is provided with some insulating materials such as hose and adhesive tape.
Additionally, some components are fi xed on the upper part of the printed circuit board. When using ties to
secure the internal wiring, do keep them away from heating or high-voltage components. The wiring must
be placed well as before. The replaced lead shall be kept away from the sharp edges of component.
Additionally, some components are fi xed on the upper part of the printed circuit board. When using ties to
secure the internal wiring, do keep them away from heating or high-voltage components. The wiring must
be placed well as before. The replaced lead shall be kept away from the sharp edges of component.
■ After maintenance, please conduct safety inspection.
Please inspect whether all the usable screws, components and leads dismantled have been put back
to the original places correctly and whether any component near the maintenance area have degraded
performance.
to the original places correctly and whether any component near the maintenance area have degraded
performance.
• Insulation resistance
As required, the insulation resistance between plug-in electric terminal and exposed area shall be
1MΩ or above.
1MΩ or above.
• Withstand Voltage
As required, the withstand voltage between plug-in electric terminal and exposed area shall be 1KV
or above.
or above.
Warning
IP4749_SR_PE45_PE55_Eng_07_140314.indd 2
IP4749_SR_PE45_PE55_Eng_07_140314.indd 2
2014-3-14 9:12:38
2014-3-14 9:12:38
3
2.
Specifi cations
2.1 Specifi cations (rating)
Model
SR-PE45
SR-PE55
Power supply
220 V ~ 50 Hz
Power (approximately) W
800
1100
Capacity (approximately) L
4.5 (Cooking capacity3.0)
5.5 (Cooking capacity3.6)
Cooking capacity of
rice, L (cup)
Rice
0.36~1.44 (2~8)
0.36~1.8 (2~10)
Porridge
0.09~0.27 (1/2~1
1
/
2
)
0.09~0.36 (1/2~2)
Unpolished
rice
0.36~1.08 (2~6)
0.36~1.44 (2~8)
Maximum
cooking capacity
as per recipe
(ingredients+water)L
Bone soup
3.0
*1
3.6
*1
Meat
Fish
Abalone
Tendons
Bean
1.5
*2
2.0
*2
Length of power line
(approximately) m
1.2
Weight (approximately) kg
4.3
5.3
Overall dimensions
(approximately) cm
(approximately) cm
Width
31.5
35.4
Depth
27.3
30.3
Height
32.4
• “*” indicates the maximum cooking capacity. “*1” indicates the “maximum” water level of the inner pot. “*2”
indicates the “maximum” water level for “bean”.
• The maximum operating pressure approximately equals to a standard pressure of 98kPa.
• The power consumed when the appliance is in standby approximately equals to 0.6W (when the power plug is
• The power consumed when the appliance is in standby approximately equals to 0.6W (when the power plug is
connected).
IP4749_SR_PE45_PE55_Eng_07_140314.indd 3
IP4749_SR_PE45_PE55_Eng_07_140314.indd 3
2014-3-14 9:12:38
2014-3-14 9:12:38
4
3. Component Identifi cation
3.1 Names of Various Components/Accessories
Before use:
Be sure to take out the anti-rust paper
between the inner pot and the casting
heater as well as the plastic bag
packaging the inner pot.
Clean the accessories, outer cover,
cooker gasket, nozzle cap and inner pot.
between the inner pot and the casting
heater as well as the plastic bag
packaging the inner pot.
Clean the accessories, outer cover,
cooker gasket, nozzle cap and inner pot.
Outer cover (back)
Pressure indicator rod
Pressure relief valve
[Pressure-Limiting Saftey Protection]
[Pressure-Limiting Saftey Protection]
Capable of relieving the pressure in
the inner pot if necessary.
the inner pot if necessary.
Temperature sensor
[Pressure Control Device]
Measure the temperature inside the inner pot
and control the internal pressure.
and control the internal pressure.
Outer cover handle
Nozzle cap
Cooker
gasket
gasket
Body
Control panel
Nozzle cap (clogging-prevention design)
Prevent food from clogging the nozzle
Safety valve [pressure-relief protection device]
In case of abnormal situation,
opening will appear on the safety
valve to relieve the internal pressure.
Rise
Drop down
Accessory
When pressure exists
in the inner pot.
in the inner pot.
When no pressure
exists in the inner pot.
exists in the inner pot.
Wire as
power line
power line
Power plug
Body plug
Nozzle
Measuring cup
(approximately 180ml)
Porridge
spoon
spoon
Steamed rice
Connection part for
body plug (back)
body plug (back)
Safety closing-rod
If the outer cover
is not correctly
placed, the
pressure relief
valve will tilt
and the safety
closing-rod will
cock up so that
the pressure inside
the inner pot will
not rise.
is not correctly
placed, the
pressure relief
valve will tilt
and the safety
closing-rod will
cock up so that
the pressure inside
the inner pot will
not rise.
Meal
spoon
spoon
Display
[Pressure selection]
One-key
selection
function
[Auxiliary cooking]
[Appointment] Button
[Power On] Button
[Keep Warm] Button
[Power Off] Button
[Time Setting] Button
(Cooking/Appointment)
Inner pot
Cooker handle
Casting heater
IP4749_SR_PE45_PE55_Eng_07_140314.indd 4
IP4749_SR_PE45_PE55_Eng_07_140314.indd 4
2014-3-14 9:12:38
2014-3-14 9:12:38