Read Panasonic NC-EG4000WTS / NC-EG3000WTS (serv.man2) Service Manual Simplified online
17
6.3.
Motorized Pump
1. Remove 1 holding screw for motorized pump.
2. Remove the communicating bushing from the water pipe
2. Remove the communicating bushing from the water pipe
packing A and container comp.
6.4.
Water Pipe Comp.
1. Remove water pipe comp.
6.5.
Case of A comp.
1. Remove case A comp. after removing 2 screws fixing
case of A comp.
6.6.
Control unit B (for display
panel)
panel)
1. Remove the board holder B and control unit B (for display
panel) from upper frame.
2. Remove control unit B (for display panel) removing claws)
of holder B.
3. Pull out the lead wire from E comp.
4. Remove the LED holder.
5. Remove the seal packing F.
4. Remove the LED holder.
5. Remove the seal packing F.
Point in reassembling
• When inserting the lead wire E comp. into the control unit B
(for display panel), insert it toward the direction shown in dia-
gram of the previous figure.
gram of the previous figure.
Click on the first or last page to see other NC-EG4000WTS / NC-EG3000WTS (serv.man2) service manuals if exist.