Read Panasonic NC-EG4000WTS / NC-EG3000WTS (serv.man2) Service Manual Simplified online
18
6.7.
Thermal Fuse comp. and
Thermistor comp.
Thermistor comp.
1. Remove the screws from the thermal insulator cover.
2. Remove the lead wires from the heater terminals.
3. Remove the thermal insulator cover from the body.
4. Remove the non-flammable tube B.
5. Remove the thermal fuse comp. from the thermal insula-
2. Remove the lead wires from the heater terminals.
3. Remove the thermal insulator cover from the body.
4. Remove the non-flammable tube B.
5. Remove the thermal fuse comp. from the thermal insula-
tor cover.
6. Remove the holding spring A of the thermistor comp. from
the thermal insulator cover.
7. Before removing the thermistor comp. from holding spring
A, turn it 90 degrees.
Service point
• Remove the lead wires for thermal fuse comp. with long
nose type pliers.
Point in reassembling
• Do not mishandle the thermal fuse comp. such as pulling,
bending or twisting.
• In assembling thermistor comp., be careful of gradient.
• In assembling thermistor comp., make sure to apply the
• In assembling thermistor comp., make sure to apply the
lubricating agent A.
6.8.
Pouring spout and lock lever A
(knob for opening and closing
the cover)
(knob for opening and closing
the cover)
1. Remove the cover comp.
2. Remove the pouring spout.
3. Remove the lock lever A toward upper side by pushing it
2. Remove the pouring spout.
3. Remove the lock lever A toward upper side by pushing it
while pushing down.
4. Remove the container packing.
Click on the first or last page to see other NC-EG4000WTS / NC-EG3000WTS (serv.man2) service manuals if exist.