Read Panasonic NC-DG3000WTS (serv.man2) Service Manual Simplified online
17
6 Disassembly and Assembly Instructions
Note :
• Reassemble in the reverse order of disassembly referring to
“Points on Reassembly”
6.1.
Bottom plate and Body
1. Remove 2 Tapping screws and 1 Truss screw from Bot-
tom plate.
2. Remove 1 screw and Sleeve from Body.
3. Remove 2 Lead wires and Earth wire from Peg frame.
4. Remove Body off.
5. Remove Waterproof cover B.
3. Remove 2 Lead wires and Earth wire from Peg frame.
4. Remove Body off.
5. Remove Waterproof cover B.
6.2.
Control unit A at bottom
1. Remove 3 claws holding waterproof cover B and remove
it.
2. Remove all the connectors, fastener terminals and lead
wire E comp. at the bottom of Control unit A.
3. Remove the non-flammable tube.
Service points
• Remove the fastener terminal stoppers by pulling them while
pressing the part indicated by arrows.
Points for reassembly
• When inserting the lead wire E comp. into control unit A at
bottom, insert it toward the direction shown on figure for Fig-
--.
--.
Click on the first or last page to see other NC-DG3000WTS (serv.man2) service manuals if exist.