NC-DG3000WTS (serv.man2) - Panasonic Home Appliance Service Manual Simplified (repair manual). Page 13

13

5.3.1.

Empty  heating  /  abnormality  high
temperature mode

Shift condition

･

When it connects power supply cord to a container in a state
without water and turns on electricity.

• When, in the state that a container has little water (0.4L or

less), a kettle is in condition to have been started.

Instructions

•

LCD : OFF 

• LED : Flashing (“Long Boil / Reboil”LED, "

Keep Warm

" LED)

Alternation flashing of 0.2 seconds

• Heater : OFF
• Others:It does not take "Select" button, “Timer” button.

Return movement

･

When it pressed the “Long Boil / Reboil” button or when the
disconnection of the sensor restored it..

Shift condition

･

When it detects bottom sensor disconnection.

Instructions

•

LCD : Lighting (H1)

• LED : Flashing (“Long Boil / Reboil” LED, "VIP 

Keep Warm

"

LED) for 0.1 seconds ON / 0.3 second OFF sequentially
flashing.

• Heater : OFF
• Others : -

Return movement

･

When the disconnection of the sensor restored it or when a
breakdown made them return by simultaneous influence of
“Long Boil / Reboil” button and  “Select / Cleaning(Press 3s)”
button.

Shift condition

･

When boiling couldn't be detected even if 120 minutes
passed from starting.

Instructions

•

LCD : Lighting (H3)

• LED : Flashing (“Long Boil / Reboil” LED, "VIP 

Keep Warm

"

LED) for 0.1 seconds ON / 0.3 second OFF sequentially
flashing.

• Heater : OFF
• Others : -

Return movement

･

When the disconnection of the sensor restored it or when a
breakdown made them return by simultaneous influence of
“Long Boil / Reboil” button and  “Select / Cleaning(Press 3s)”
button.