Read Panasonic NC-DG3000WTS (serv.man2) Service Manual Simplified online
20
Service point
• Remove the lead wires for thermal fuse comp. with long
nose type pliers.
Point in reassembling
• Do not mishandle the thermal fuse comp. such as pulling,
bending or twisting.
• In assembling thermistor comp., be careful of gradient.
• In assembling thermistor comp., make sure to apply the
• In assembling thermistor comp., make sure to apply the
lubricating agent A.
6.9.
Pouring spout and lock lever A
(knob for opening and closing
the cover)
(knob for opening and closing
the cover)
1. Remove the cover comp.
2. Remove the pouring spout.
3. Remove the lock lever A toward upper side by pushing it
2. Remove the pouring spout.
3. Remove the lock lever A toward upper side by pushing it
while pushing down.
4. Remove the container packing.
Point in reassembling
• When reassembling the pouring spout, insert the dowel of
container comp. into the 2 long ribs. (refer to “Knob” in below
diagram)
diagram)
• The containner packing shall closely contact the container
flange without twisting or distortion.
6.10. Name B (Decorative panel)
1. Remove the name B panel by picking with a bladed
screwdriver or a pin at point “A” .
Click on the first or last page to see other NC-DG3000WTS (serv.man2) service manuals if exist.