WV-NW470S, WV-NW474SE - Panasonic Video Monitoring Service Manual (repair manual). Page 7

1-3

• The default setting of SW501 on the Main Board is as fol-

lows;

You can reset the following data back to the factory default set-
tings.

Camera Setup
Setup Menu (PC oriented)
HTML files

■

• Move the cursor to CAMERA RESET.
• Hold down [Left], [Right], and [SET] buttons simultaneously

for 2 seconds on the camera, or click the All Reset button on
your computer display.

■

• In the power-on state, press the [Up] and [Down] buttons

simultaneously while holding down the button A.
Hold down the button A for 15 seconds. It will take about 10
seconds to complete the initializing. Be sure to continue sup-
plying power to the camera while initializing.
Notes:

• Clock calibration is required even after initializing the

setup menu.

• Try again if the previous initializing failed.

■

• In the power-on state, press the side panel buttons, [Up] and

[Down] simultaneously while holding down the button B.
Hold down the button B for 15 seconds. It will take about 10
seconds to complete the initializing. Be sure to continue sup-
plying power to the camera while initializing.
Notes:

• Never press both the buttons A and B at a time.
• Try again if the previous initializing failed.

IC502

1

2

O

N