Read Panasonic WV-NW470S / WV-NW474SE Service Manual online
1-2
!7
Set button (SET)
Validates the selection or opens a detailed menu.
!8
DIP switch
Specifies certain settings shown in the figure. The default
setting is marked with an asterisk *.
setting is marked with an asterisk *.
Note:
The settings will be applied to the camera only when
DIP SW, not MENU, is selected in the menu setup.
!9
Monitor output jack
Connects to the LCD monitor and other devices with a 3.5
diam. 2-pole L-type plug for checking images.
diam. 2-pole L-type plug for checking images.
@0
Dome cover
@1
Network port
Connects to a PC or a network via a hub with a 10BASE-
T/100BASE-TX cable.
T/100BASE-TX cable.
@2
Video output connector
Connects to the video input terminal of the monitor or
recorder.
recorder.
@3
Control connector
Connects respective devices. See Connections and
Specifications for details.
Day/night in: Optical sensor
Alarm in: Door switch
Alarm out: Buzzer
AUX out: Illumination
GND: Signal ground
Specifications for details.
Day/night in: Optical sensor
Alarm in: Door switch
Alarm out: Buzzer
AUX out: Illumination
GND: Signal ground
@4
Power cable
Supplies power to the camera.
@5
Camera mounting bracket
@6
Cable access hole
@7
Sideway cable exit
@0
@1
@2
@3
@4
@5
@6
@7
@7
1
2
3
4
5
ON
1
2
3
4
5
B/W
B/W
Aperture
Upside
Sync
level
Down
ON
High*
AUTO1
Soft
ON
LL
OFF
Low
OFF*
Sharp*
OFF*
INT*
Click on the first or last page to see other WV-NW470S / WV-NW474SE service manuals if exist.