Read Panasonic WV-NM100 Service Manual online
– 6 –
Begin the setup when the PC is in the same condition as just
after the startup.
The "Control Panel" window appears.
Screenshot 2
Screenshot 1
Select "Control Panel" ([Start] - [Settings] - [Control Panel]).
STEP1
Click once to select the [Network] icon.
STEP2
Using Windows 98 SE
The "Network" window appears.
The "TCP/IP Properties" window appears.
Screenshot 4
Screenshot 3
Click the [Configuration] tab.
Click to select the TCP/IP protocol of the currently used net-
work card.
If the item of the TCP/IP protocol is not displayed, refer to
the operating instructions of the OS and follow the proce-
dures to install the TCP/IP.
work card.
If the item of the TCP/IP protocol is not displayed, refer to
the operating instructions of the OS and follow the proce-
dures to install the TCP/IP.
Click the [Properties] button.
STEP5
STEP4
STEP3
Click the [IP Address] tab.
Click the "Specify an IP address" radio button.
Enter the IP Address and the Subnet Mask as follows.
• IP Address:
192.168.0.9
• Subnet Mask:
255.255.255.0
Click the [OK] button, and the window closes.
Restart the PC to make the IP Address valid.
STEP10
STEP9
STEP8
STEP7
STEP6
The following procedure is an example when using Windows 98 SE.
Click on the first or last page to see other WV-NM100 service manuals if exist.