WV-NM100 - Panasonic Video Monitoring Service Manual (repair manual). Page 5

Read Panasonic WV-NM100 Service Manual online

– 2 –
DISASSEMBLING PROCEDURE
• Referring to Fig. 1, remove two screws that secure the
Bottom Case and remove the Bottom Case from the
Upper Case.
Fig.1
• Referring to Fig. 2, pull out the Main Board and the Power
Board slightly while releasing the two hooks of the Upper
Case from the Upper Case.
• Disconnect the connector CN201 on the Main Board and
remove the Wire Ass'y of the Lithium Battery.
• Disconnect the connectors CN401 and CN402 on the
Main Board, and remove the Flexible Cables of the
Pan/Tilt Mechanical Ass'y.
• Disconnect the connector CN500 on the Main Board and
remove the Flexible Cable of the Camera Module Ass'y,
and remove the Main Board and the Power Board from
the Upper Case.
Fig. 2
• Referring to Fig. 3, disconnect the connector CN105 on
the Main Board and remove the Power Board from the
Main Board.
Fig. 3
• Referring to Fig. 4, remove the three screws that secure
the Pan/Tilt Mechanical Ass'y and remove the Pan/Tilt
Mechanical Ass'y and Dome Cover from the Upper Case.
Fig. 4
• Referring to Fig. 5, remove the Camera Holding Plate of
the Pan/Tilt Mechanical Ass'y while releasing the hook of
the Pan/Tilt Mechanical Ass'y.
• Remove the Camera Module Ass'y from the Pan/Tilt
Mechanical Ass'y.
Fig. 5
Upper Case
Bottom Case
Remove two screws
Upper Case
Flexible Cables of
the Pan/Tilt
Mechanical Ass'y
Flexible Cable of
the Camera
Module Ass'y
Wire Ass'y of the
Lithium Battery
CN201
CN402
CN500
CN401
Main Board
Main Board
Power Board
Remove three screws
Pan/Tilt Mechanical Ass'y
Dome Cover
Upper Case
Hook
Pan/Tilt
Mechanical
Ass'y
Camera Holding Plate
of the Pan/Tilt
Mechanical Ass'y
Camera Module Ass'y
Power Board
CN105
Lithium Battery
Hooks

Display

Click on the first or last page to see other WV-NM100 service manuals if exist.

Random: