Read Panasonic WV-NM100 Service Manual online
– 8 –
Confirmation of the browser
Confirmation of the IP Address
Confirmation of the Network Setup of the PC
Not Displayed or Live Image is Defective
• Proceed to Confirmation of the Panning/Tilting Controls .
Displayed
Displayed
• Flexible Cable of the Camera Module Ass'y is broken or uncon-
nected from CN500 on the Main Board.
• Otherwise, of the OVERALL BLOCK DIAGRAM on page 10
has problem.
Confirmation of the Panning/Tilting Controls
• Flexible Cables of the Pan/Tilt Mechanical Ass'y are broken.
• Otherwise, of the OVERALL BLOCK DIAGRAM on page 10 has problem.
• Otherwise, of the OVERALL BLOCK DIAGRAM on page 10 has problem.
Not Controlled
Controlled
Note: • Set TCP/IP address to correctly.
• Do not use proxy for address 192.168.0.10.
IP Address:
192.168.0.2~9.11~254
Subnet Mask:
255.255.255.0
Default Gateway: 192.168.0.1
Note: Access from the browser with correct IP Address.
IP Address: 192.168.0.10
From page 7
Confirmation of the Time Display
•
of the OVERALL BLOCK DIAGRAM on page 10 has problem.
Not Displayed
Displayed
Normal Function has No problem
Confirmation of the Camera Detection
Is the Network Camera and the PC connected directly?
Not Detected
• Connect them correctly and proceed.
•
•
Confirmation of the Camera Detection again.
Not Connected Directry
• Main Board has problem.
(Except , , of the OVERALL BLOCK DIAGRAM on page 10.)
Connected Directry
Detected
(Click the [REFRESH] button after the "Panasonic IP Setup" software is started.)
Displayed
D E
F
Not Displayed or Live Image is Defective
Not Displayed or Live Image is Defective
• Proceed to Confirmation of the Panning/Tilting Controls .
D
E
E
Click on the first or last page to see other WV-NM100 service manuals if exist.