Read Panasonic WV-CW960 / WV-CW964 Service Manual online
8
Referring to Fig. 2-7, remove one screw that secure the
FFC Holder Cover and remove the FFC Holder Cover
and the FFC Holder from the Mechanical Unit.
FFC Holder Cover and remove the FFC Holder Cover
and the FFC Holder from the Mechanical Unit.
8
Disconnect two connectors (CN4 on the Main Board and
CN1 on the Servo Board) and remove the Flexible Flat
Cable from the Mechanical Unit.
CN1 on the Servo Board) and remove the Flexible Flat
Cable from the Mechanical Unit.
8
After removed the Flexible Flat Cable from two connec-
tors, restore the lock lever of two connectors.
tors, restore the lock lever of two connectors.
8
Remove three screws that secure the Sub Chassis Ass'y.
8
Remove one screw that secure the FFC Clamp and
remove the FFC Clamp and the Sub Chassis Ass'y from
the Mechanical Unit.
remove the FFC Clamp and the Sub Chassis Ass'y from
the Mechanical Unit.
8
Remove one E Ring that secure the Tilt Gear Ass'y and
remove the Tilt Gear Ass'y from the Mechanical Unit.
remove the Tilt Gear Ass'y from the Mechanical Unit.
8
Remove the Camera Unit from the Mechanical Unit.
2-5
8
Referring to Fig. 2-8, remove two screws that secure the
Rear Lens Cover, release two hooks of the Rear Lens
Cover and remove the Rear Lens Cover from the Front
Lens Cover.
Rear Lens Cover, release two hooks of the Rear Lens
Cover and remove the Rear Lens Cover from the Front
Lens Cover.
8
Remove two screws that secure the Front Lens Cover
and remove the Front Lens Cover from the Camera Unit.
and remove the Front Lens Cover from the Camera Unit.
8
Referring to Fig. 2-9, disconnect two connectors (CN204
on the Main Board and CN400 on the Tilt Board) and
remove the Flexible Flat Cable from the Camera Unit .
on the Main Board and CN400 on the Tilt Board) and
remove the Flexible Flat Cable from the Camera Unit .
8
After removed the Flexible Flat Cable from two connec-
tors, restore the lock lever of two connectors.
Otherwise the lock lever will catch on the Chassis
when the Camera Head is removed from the Chassis.
tors, restore the lock lever of two connectors.
Otherwise the lock lever will catch on the Chassis
when the Camera Head is removed from the Chassis.
8
Remove two screws that secure the Lens Shield Cover
from the Lens Chassis Unit of the Camera Unit.
from the Lens Chassis Unit of the Camera Unit.
8
Remove three screws that secure the Camera Head and
remove the Camera Head from the Lens Chassis Unit.
remove the Camera Head from the Lens Chassis Unit.
Fig. 2-7
Camera Unit
FFC
Holder
Holder
FFC
Holder
Cover
Holder
Cover
Remove
one
screw.
one
screw.
Remove
one
screw.
one
screw.
Tilt
Gear
Ass'y
Gear
Ass'y
Mechanical
Unit
Unit
FFC
Clamp
Clamp
CN1 on the
Servo Board
Servo Board
Flexible
Flat Cable
Flat Cable
CN4 on the
Main Board
Main Board
Sub Chassis
Ass'y
Ass'y
Remove
three
screws.
three
screws.
Remove
one
screw.
one
screw.
E Ring
Fig. 2-8
Remove two
screws.
screws.
Remove two
screws.
screws.
Rear Lens
Cover
Cover
Hooks
Front Lens
Cover
Cover
Camera Unit
Fig. 2-9
Remove
two
screws.
two
screws.
Remove
two screws.
two screws.
Lens Shield
Cover
Cover
Camera Head
Remove one
screw.
screw.
Flexible Flat Cable
Lens Chassis
Unit
Unit
CN400 on the
Tilt Board
Tilt Board
CN204 on the
Main Board
Main Board
Click on the first or last page to see other WV-CW960 / WV-CW964 service manuals if exist.