WV-CW960, WV-CW964 - Panasonic Video Monitoring Service Manual (repair manual)

wv-cw960, wv-cw964 service manual
Model
WV-CW960 WV-CW964
Pages
65
Size
7.58 MB
Type
PDF
Document
Service Manual
Brand
Device
Video Monitoring / COLOUR CCTV CAMERA
File
wv-cw960-wv-cw964.pdf
Date

Read Panasonic WV-CW960 / WV-CW964 Service Manual online

ORDER NO. AVS0512679C8
Colour CCTV Camera
WV-CW960, WV-CW964
SPECIFICATIONS
M a t s u s h i t a   E l e c t r i c   I n d u s t r i a l   C o . ,   L t d .
A l l   r i g h t s   r e s e r v e d .   U n a u t h o r i z e d   c o p y i n g   a n d
d i s t r i b u t i o n   i s   a   v i o l a t i o n   o f   l a w .
2 0 0 5
The  Product  with  PbF
WV-CW964
WV-CW960
Power Requirements
24 V AC, 50 Hz
220 V - 240 V AC, 50 Hz
Power Consumption
77 W
90 W
Pick-up Device
1/4-type {1/4"} interline transfer CCD
Effective Pixels
752 (H) 
×
582 (V)
Scanning Area
3.65 mm (H) 
×
2.71 mm (V)
Signal
PAL
Synchronization
Internal (INT), multiplexed vertical drive (VD2), line-lock (LL)
Scanning
2:1 interlace
Scanning Frequencies
Horizontal: 15.625 kHz, Vertical: 50.00 Hz
Video Output
VBS: 1.0 V [P-P]/75 
(BNC plug)
Resolution (Centre)
Horizontal : 480 TV lines minimum (colour NORMAL mode)
540 TV lines typ. , 520 TV lines minimum (colour HIGH mode)
570 TV lines minimum (black and white) 
Vertical
: 400 TV lines minimum (Centre)
Minimum Illumination
0.5 lux (colour mode)
0.04 lux (black and white mode) 
SENS UP: OFF; AGC: HIGH 
Dynamic Range
54 dB typ. (SUPER-D
3: ON) 
S/N Ratio
50 dB minimum (AGC: OFF) 
General
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage within 
the unit may have sufficient magnitude to cause electric 
shock. Therefore, it is dangerous to make any kind of contact 
with any inside part of this unit.
This symbol alerts the user that important literature concerning 
the operation and maintenance of this has been included.
Therefore,  it  should  be  read  carefully  in  order  to avoid 
any problems.
T
here are special components used in this equipment which are important for safety. These parts are indicated 
by the ”
 
Y
 
” mark on the schematic diagram and the replacement parts list. It is essential that these critical 
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
IMPORTANT SAFETY NOTICE
About  Lead  Free  Solder (PbF)
Distribution of PbF PCB:
PCBs (manufactured) using lead free solder (PbF) will have a stamp on the PCB.
Caution:
8
Lead free solder has a higher melting point than standard solder. Typically the melting points is 35 
°
C – 40 
°
C
(95 
°
F – 104 
°
F) higher. Please use a soldering iron with temperature control and adjust it to 360 
°
C – 370 
°
C
(680 
°
F – 698 
°
F). In case of using high temperature soldering iron, please be careful not to heat too long.
8
Lead free solder will tend to splash when heated too high (600 
°
C / 1112 
°
F).
8
Lead free solder (Sn - 3.0Ag – 0.5Cu) or equivalents are recommended on repairing our lead free soldered PCB.
Y
   WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the 
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to 
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any 
attempt to service or repair the product or products dealt with in this service information by anyone else could 
result in serious injury or death.
Pan and Tilt 
Panning Range
360° endless
Panning Modes
Manual, auto, manual position, sequential position 
Panning Speed*
2
Manual: Approximately 0.065 °/s to 120 °/s  8 steps, 16 steps, 64 steps
Preset: Approximately 400 °/s
Tilting Range
-5° to 185° (horizontal - vertical - horizontal)
(According to the TILT ANGLE)
Tilting Modes
Manual, manual position, sequential position 
Tilting Speed*
2
Manual: Approximately 0.065 °/s to 120 °/s  8 steps, 16 steps, 64 steps 
Preset: Approximately 400 °/s
*2  Actual speed depends on type of controller being used. 
Ambient Operating Temperature
-40 °C to +50 °C; Humidity 90 % max. (non-condensation)*
1
Water Resistance
IP66 protection from water jets from a nozzle (IEC60529/JIS C 0920) 
Dimensions
239 mm (D) 
×
395.5 mm (H) 
Weight
Approximately 4.7 kg
Finish
Camera: Die cast aluminium, baked on coating (Paint colour: Fine sliver)
Sun shield: ASA resin, coated (Paint colour: Fine silver) 
Dome: Clear polycarbonate resin
*1  When power is on continuously (however, the camera's interior temperature is -10 °C or higher) 
Lens
Zoom Ratio
30x (Approximately 300x with digital zoom) 
Focal Length
3.8 mm to 114 mm
Maximum Aperture Ratio
1:1.4 (WIDE) to 3.6 (TELE) 
Object Distance
1.5 m
Iris Range
F1.4 to 22, Close
Angular Field of View
Horizontal: 1.8° (TELE) to 52° (WIDE)
Vertical: 1.4° (TELE) to 40° (WIDE)
Main Functions
Controller Interface
Coaxial Multiplex System, RS485
Control Functions
Pan and tilt, zoom and focus, 256 preset positions, home position, patrol
AGC
ON (LOW), ON (MID), ON (HIGH), OFF
Title (ID)
ON, OFF (Preset ID, camera ID, area title: 16 alphanumeric characters) 
Zoom Speed
Approximately 6.0 seconds (TELE to WIDE) in manual mode 
Zoom Limit
1x to 300x (Over 30x is digital zoom)
Password Lock
All menus 
Auto Focus
MANUAL/AUTO (PAN, TILT, ZOOM linked) 
Iris
ALC (Adjustable OPEN/CLOSE output target level)/MANUAL
Shutter
OFF (1/50), AUTO, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Electronic Sensitivity Enhancement
32X max. (AUTO or FIX)
Auto Mode
OFF, SEQ, SORT, AUTO PAN, PATROL, AUTO TRACK
Auto Pan Key
SEQ, SORT, AUTO PAN, PATROL, AUTO TRACK
Digital Flip
ON/OFF
SUPER-D
3
ON/OFF
Motion Detector
OFF/MODE1/MODE2
Alarm Input/Output
4 inputs (ALARM IN 1 to ALARM IN 4)
2 outputs (ALARM/AUX1, BW/AUX2)
Black and White Mode Switching
AUTO/ON/OFF
Privacy Zone
ON/OFF (8 zone settings) 
Patrol
STOP/PLAY/LEARN 
Cleaning
ON/OFF
Image Hold
ON/OFF
Auto Image Stabilizer
ON/OFF
Scene Select Setting
INDOOR (L) /INDOOR (H) /OUTDOOR (L) /OUTDOOR (H)
Language Setting
Japanese, English, German, French, Italian, Spanish, Russian, Chinese 
LIMITATION OF LIABILITY
THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-
INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE
INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING
PRODUCT(S).
DISCLAIMER OF WARRANTY
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR
REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING
ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY
THE DEVICES OF THIRD PARTY.
(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING PHOTOGENIC SUBJECT, DUE
TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA's PICTURE, INCLUDING SAVED DATA, FOR
SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE.
(7) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, ANY LOSS OR DAMAGE, ARISING OUT OF THE IMPROPER DETECTION
OR SLIP-UP IN DETECTION BY VMD (Video Motion Detector) FUNCTION OF THE PRODUCT.
STANDARD ACCESSORIES
Operating Instructions......................................................1 pc.
8P Alarm Cable ................................................................1 pc.
4P Alarm Cable ................................................................1 pc.
Connector for 24 V  AC (only for WV-CW964)..................1 pc.
Front/rear sun shield.........................................................1 set
Front/rear sun shield mounting screws ............................2 pcs. (*one screw is a spare)
Waterproof cap.................................................................3 pcs.
Page of 65
Display

Download Panasonic WV-CW960 / WV-CW964 Service Manual (Repair Manual)

Here you can read online and download Panasonic WV-CW960 / WV-CW964 Service Manual in PDF. WV-CW960 / WV-CW964 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Panasonic WV-CW960 / WV-CW964 Video Monitoring. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.