Read Panasonic WV-CPR460 / WV-CPR464E Service Manual Simplified online
WV-CPR460 Series
– 3 –
Referring to Fig. 2-5, remove one screw that secure the
Power Board Unit and I/F Board.
Disconnect the connectors CN402 and CN403 on the
Main Board, and remove the I/F Board.
Disconnect the connector CN404 on the Main Board and
remove the Power Board Unit.
Remove one screw that secure the Earth Lug and
Washer and remove the Earth Lug and Washer (For WV-
CPR460 only).
Power Board Unit and I/F Board.
Disconnect the connectors CN402 and CN403 on the
Main Board, and remove the I/F Board.
Disconnect the connector CN404 on the Main Board and
remove the Power Board Unit.
Remove one screw that secure the Earth Lug and
Washer and remove the Earth Lug and Washer (For WV-
CPR460 only).
Fig. 2-6
Reconnect the CN1 and CN8 on the I/F Board to the
CN402 and CN403 on the Main Board.
Reconnect the connectors by using the Extension Cable
(Refer to Fig. 1-1), between CN404 on the Main Board
and CN101 on the Power Board Unit for Adjustment.
CN402 and CN403 on the Main Board.
Reconnect the connectors by using the Extension Cable
(Refer to Fig. 1-1), between CN404 on the Main Board
and CN101 on the Power Board Unit for Adjustment.
Referring to Fig. 2-4, remove one screw that secure the
Front Unit.
Disconnect the Connector CN401 on the Main Board and
remove the Flexible Board Ass’y and Front Unit for the
Head Optical Ass’y Replacement.
Front Unit.
Disconnect the Connector CN401 on the Main Board and
remove the Flexible Board Ass’y and Front Unit for the
Head Optical Ass’y Replacement.
Remove one screw
Front Unit
Referring to Fig. 2-6, remove four screws that secure the
Main Board and remove the Main Board from the Main
Chassis.
Main Board and remove the Main Board from the Main
Chassis.
Fig. 2-5
Remove
one screw
one screw
CN402
Main
Board
Board
CN404
Earth
Lug
Earth
Lug
Washer
Remove
one
screw
one
screw
CN101
CN1
Power
Board
Unit
Board
Unit
I/F Board
Remove
one screw
one screw
CN402
Main
Board
Board
CN404
CN101
CN1
Power
Board
Unit
Board
Unit
I/F Board
(WV-CPR460)
(WV-CPR464E)
Remove four screws
Main Chassis
Main Board
Flexible Board Ass’y
CN401
Fig. 2-4
Fig. 3-1
Remove two screws
Front Unit
Head Optical Ass’y
3. Head Optical Ass'y Replacement
Procedure
Disassemble the Front Unit of the Camera while referring to
the item 2. Disassembling Procedure for Adjustment.
Referring to Fig. 3-1, disconnect the Connector on the
Head Optical Ass’y and remove the Flexible Board Ass’y.
Remove two screws that secure the Head Optical Ass’y
on the Front Unit and remove the Head Optical Ass’y on
the Front Unit.
Replace Head Optical Ass'y with new one.
the item 2. Disassembling Procedure for Adjustment.
Referring to Fig. 3-1, disconnect the Connector on the
Head Optical Ass’y and remove the Flexible Board Ass’y.
Remove two screws that secure the Head Optical Ass’y
on the Front Unit and remove the Head Optical Ass’y on
the Front Unit.
Replace Head Optical Ass'y with new one.
Connector
Flexible Board
Ass’y
Ass’y
CN403
CN403
CN8
CN8
Click on the first or last page to see other WV-CPR460 / WV-CPR464E service manuals if exist.