Read Panasonic WV-CPR460 / WV-CPR464E Service Manual Simplified online
ADJUSTMENT PROCEDURE
1. Test Equipment Required
The following test equipment are required for adjustment
of the Colour CCTV Camera WV-CPR460 and WV-
CPR464E.
Oscilloscope
Frequency Counter
Waveform Monitor
Vectorscope
Underscanned Colour Video Monitor
Video Signal Generator
12 V DC Power Supply Unit
Personal Computer (IBM PC/AT type or equivalent)
Standard Straight RS-232C Cable
ALC Lens (WV-LA9C3A, WV-LA9C3B or equivalent)
Lux Meter
Lighting (275 footcandles (2,750 ± 150 lux), Colour
Temperature 5,100 ± 100 K)
Colour Temperature Conversion Filters
(KENKO: W12, C4 or equivalent)
Radiation Chart
Logarithmic Gray Scale Chart.
(Part Number:YWV2310RB99)
Extension Cable as shown in Fig. 1-1.
(Part Number: YWV0EA1171AN)
of the Colour CCTV Camera WV-CPR460 and WV-
CPR464E.
Oscilloscope
Frequency Counter
Waveform Monitor
Vectorscope
Underscanned Colour Video Monitor
Video Signal Generator
12 V DC Power Supply Unit
Personal Computer (IBM PC/AT type or equivalent)
Standard Straight RS-232C Cable
ALC Lens (WV-LA9C3A, WV-LA9C3B or equivalent)
Lux Meter
Lighting (275 footcandles (2,750 ± 150 lux), Colour
Temperature 5,100 ± 100 K)
Colour Temperature Conversion Filters
(KENKO: W12, C4 or equivalent)
Radiation Chart
Logarithmic Gray Scale Chart.
(Part Number:YWV2310RB99)
Extension Cable as shown in Fig. 1-1.
(Part Number: YWV0EA1171AN)
Make a conversion cable as follows.
Fig. 1-2
Remote Electric Variable Resistor (E. V. R.) kit as shown in
Fig. 1-2. (Part Number: YWV0EA1174AN)
Fig. 1-2. (Part Number: YWV0EA1174AN)
13
12
11
10
9
8
7
6
5
4
3
2
1
26
25
24
23
22
21
20
19
18
17
16
15
14
GND
T (B)
R (B)
To
Remote
E. V. R.
Kit
Remote
E. V. R.
Kit
To PC
Via RS-232C
Cable
Via RS-232C
Cable
2. Disassembling Procedure for
Adjustment
Referring to Fig. 2-1, remove two screws that secure the
Mount Adaptor and remove the Mount Adaptor.
Mount Adaptor and remove the Mount Adaptor.
Referring to Fig. 2-2, remove two screws that secure the
Main Cover and remove the Main Cover.
Main Cover and remove the Main Cover.
Remove two screws
Mount Adaptor
Fig. 2-1
Remove two screws
Main Cover
– 2 –
WV-CPR460 Series
Fig. 2-3
Referring to Fig. 2-3, remove the Rear Escutcheon and
the Rear Panel while Releasing the four hocks of the
Rear Escutcheon.
the Rear Panel while Releasing the four hocks of the
Rear Escutcheon.
Rear Panel
Hocks
Rear Escutcheon
Fig. 1-1
To
Main Board
CN404
Main Board
CN404
To
Power Board
Unit CN101
Power Board
Unit CN101
CN3
CN2
Fig. 2-2
Fig. 1-3
Click on the first or last page to see other WV-CPR460 / WV-CPR464E service manuals if exist.