WJ-SX550 - Panasonic Video Monitoring Service Manual Supplement (repair manual). Page 48

Read Panasonic WJ-SX550 Service Manual Supplement online

– 45 –
8
After completion the check of the SW6, all sections of the
SW6 are reset to the Off positions.
8
Set the SW7-1 to On, the 7-segment LED should be indi-
cated 7
.
1 and the Data “STX SA 053 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-1 to Off, the 7-segment LED should be indi-
cated 7  1 and the Data “STX SA 054 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-2 to On, the 7-segment LED should be indi-
cated 7
.
2 and the Data “STX SA 055 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-2 to Off, the 7-segment LED should be indi-
cated 7  2 and the Data “STX SA 056 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-3 to On, the 7-segment LED should be indi-
cated 7
.
3 and the Data “STX SA 057 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-3 to Off, the 7-segment LED should be indi-
cated 7  3 and the Data “STX SA 058 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-4 to On, the 7-segment LED should be indi-
cated 7
.
4 and the Data “STX SA 059 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-4 to Off, the 7-segment LED should be indi-
cated 7  4 and the Data “STX SA 060 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-5 to On, the 7-segment LED should be indi-
cated 7
.
5 and the Data “STX SA 061 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-5 to Off, the 7-segment LED should be indi-
cated 7  5 and the Data “STX SA 062 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-6 to On, the 7-segment LED should be indi-
cated 7
.
6 and the Data “STX SA 063 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-6 to Off, the 7-segment LED should be indi-
cated 7  6 and the Data “STX SA 064 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-7 to On, the 7-segment LED should be indi-
cated 7
.
7 and the Data “STX SA 065 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-7 to Off, the 7-segment LED should be indi-
cated 7  7 and the Data “STX SA 066 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-8 to On, the 7-segment LED should be indi-
cated 7
.
8 and the Data “STX SA 067 ETX” is transmitted
to the RS-232C line.
8
Set the SW7-8 to Off, the 7-segment LED should be indi-
cated 7  8 and the Data “STX SA 068 ETX” is transmitted
to the RS-232C line.
8
After completion the check of the SW7, all sections of the
SW7 are reset to the Off positions.
8
Set the SW8-1 to On, the 7-segment LED should be indi-
cated 8
.
1 and the Data “STX SA 069 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-1 to Off, the 7-segment LED should be indi-
cated 8  1 and the Data “STX SA 070 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-2 to On, the 7-segment LED should be indi-
cated 6
.
2 and the Data “STX SA 071 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-2 to Off, the 7-segment LED should be indi-
cated 6  2 and the Data “STX SA 072 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-3 to On, the 7-segment LED should be indi-
cated 6
.
3 and the Data “STX SA 073 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-3 to Off, the 7-segment LED should be indi-
cated 6  3 and the Data “STX SA 074 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-4 to On, the 7-segment LED should be indi-
cated 6
.
4 and the Data “STX SA 075 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-4 to Off, the 7-segment LED should be indi-
cated 6  4 and the Data “STX SA 076 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-5 to On, the 7-segment LED should be indi-
cated 6
.
5 and the Data “STX SA 077 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-5 to Off, the 7-segment LED should be indi-
cated 6  5 and the Data “STX SA 078 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-6 to On, the 7-segment LED should be indi-
cated 6
.
6 and the Data “STX SA 079 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-6 to Off, the 7-segment LED should be indi-
cated 6  6 and the Data “STX SA 080 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-7 to On, the 7-segment LED should be indi-
cated 6
.
7 and the Data “STX SA 081 ETX” is transmitted
to the RS-232C line.
8
Set the SW8-7 to Off, the 7-segment LED should be indi-
cated 6  7 and the Data “STX SA 082 ETX” is transmitted
to the RS-232C line.
Page of 60
Display

Click on the first or last page to see other WJ-SX550 service manuals if exist.