Read Panasonic WJ-SX550 Service Manual Supplement online
– 44 –
8
Set the SW5-1 to Off, the 7-segment LED should be indi-
cated 5 1 and the Data “STX SA 022 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-2 to On, the 7-segment LED should be indi-
cated 5
.
2 and the Data “STX SA 023 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-2 to Off, the 7-segment LED should be indi-
cated 5 2 and the Data “STX SA 024 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-3 to On, the 7-segment LED should be indi-
cated 5
.
3 and the Data “STX SA 025 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-3 to Off, the 7-segment LED should be indi-
cated 5 3 and the Data “STX SA 026 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-4 to On, the 7-segment LED should be indi-
cated 5
.
4 and the Data “STX SA 027 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-4 to Off, the 7-segment LED should be indi-
cated 5 4 and the Data “STX SA 028 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-5 to On, the 7-segment LED should be indi-
cated 5
.
5 and the Data “STX SA 029 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-5 to Off, the 7-segment LED should be indi-
cated 5 5 and the Data “STX SA 030 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-6 to On, the 7-segment LED should be indi-
cated 5
.
6 and the Data “STX SA 031 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-6 to Off, the 7-segment LED should be indi-
cated 5 6 and the Data “STX SA 032 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-7 to On, the 7-segment LED should be indi-
cated 5
.
7 and the Data “STX SA 033 ETX” is transmitted
to the RS-232C line.
8
Set the SW5-7 to Off, the 7-segment LED should be indi-
cated 5 7 and transmit the Data “STX SA 034 ETX” is
transmitted to the RS-232C line.
8
Set the SW5-8 to On, the 7-segment LED should be indi-
cated 5
.
8 and the Data “STX SA 035 ETX” to the RS-
232C line.
8
Set the SW5-8 to Off, the 7-segment LED should be indi-
cated 5 8 and the Data “STX SA 036 ETX” is transmitted
to the RS-232C line.
8
After completion the check of the SW5, all sections of the
SW5 are reset to the Off positions.
8
Set the SW6-1 to On, the 7-segment LED should be indi-
cated 6
.
1 and the Data “STX SA 037 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-1 to Off, the 7-segment LED should be indi-
cated 6 1 and the Data “STX SA 038 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-2 to On, the 7-segment LED should be indi-
cated 6
.
2 and the Data “STX SA 039 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-2 to Off, the 7-segment LED should be indi-
cated 6 2 and the Data “STX SA 040 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-3 to On, the 7-segment LED should be indi-
cated 6
.
3 and the Data “STX SA 041 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-3 to Off, the 7-segment LED should be indi-
cated 6 3 and the Data “STX SA 042 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-4 to On, the 7-segment LED should be indi-
cated 6
.
4 and the Data “STX SA 043 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-4 to Off, the 7-segment LED should be indi-
cated 6 4 and the Data “STX SA 044 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-5 to On, the 7-segment LED should be indi-
cated 6
.
5 and the Data “STX SA 045 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-5 to Off, the 7-segment LED should be indi-
cated 6 5 and the Data “STX SA 046 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-6 to On, the 7-segment LED should be indi-
cated 6
.
6 and the Data “STX SA 047 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-6 to Off, the 7-segment LED should be indi-
cated 6 6 and the Data “STX SA 048 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-7 to On, the 7-segment LED should be indi-
cated 6
.
7 and the Data “STX SA 049 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-7 to Off, the 7-segment LED should be indi-
cated 6 7 and the Data “STX SA 050 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-8 to On, the 7-segment LED should be indi-
cated 6
.
8 and the Data “STX SA 051 ETX” is transmitted
to the RS-232C line.
8
Set the SW6-8 to Off, the 7-segment LED should be indi-
cated 6 8 and the Data “STX SA 052 ETX” is transmitted
to the RS-232C line.
Click on the first or last page to see other WJ-SX550 service manuals if exist.