Read LG 50PZ570B-SB (CHASSIS:PB12A) Service Manual online
5-3. Check Tool Option and write Country
Group & Area Code(Option) D/L
5-4. Adjustment Color Temperature
(White balance)
(1) Required Instruments
1) Color Analyzer: CA-210 (CH 9)
2) Using LCD color temperature, Color Analyzer (CA-210)
2) Using LCD color temperature, Color Analyzer (CA-210)
must use CH 9, which Matrix compensated (White, Red,
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
3) Auto-adjustment Equipment (It needs when Auto-
adjustment – It is availed communicate with RS-232C :
Baud rate: 115200)
Baud rate: 115200)
4) Video Signal Generator MSPG-925F 720p, 216Gray
(Model: 217, Pattern 78)
* Before Adjust of White Balance, Please press POWER
ONLY key
Adjust Process will start by execute RS232C Command.
V
Color temperature standards according to CSM and
Module
Module
V
CS-1000/ CA-210(CH 10) White balance adjustment
coordinates and color temperature
coordinates and color temperature
5-5. Using Inner pattern (Manual method)
V
Test Equipment: CA-210
(1) Using PDP color temperature, Color Analyzer (CA-210)
must use CH 10, which Matrix compensated (White, Red,
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
(2) Manual adjustment sequence is like bellowed one.
(3) Turn to “Ez-Adjust” mode with press ADJ button of service
(3) Turn to “Ez-Adjust” mode with press ADJ button of service
remocon.
(4) Select “10.Test Pattern” with CH+/- button and press
enter. Then set will go on Heat-run mode. Over 30 minutes
set let on Heat-run mode.
set let on Heat-run mode.
(5) Let CA-210 to zero calibration and must has gap more
10cm from center of PDP module when adjustment.
(6) Press “ADJ” button of service remocon and select
“7.White-Balance” in “Ez-Adjust” then press “
G
” button of
navigation key. (When press “
G
” button then set will go to
full white mode)
(7) Adjust at three mode (Cool, Medium, Warm)
(8) If “cool” mode
(8) If “cool” mode
Let B-Gain to 192 and R, G, B-Cut to 64 and then control
R, G gain adjustment High Light adjustment.
R, G gain adjustment High Light adjustment.
(9) If “Medium” and “Warm” mode Let R-Gain to 192 and R,
G, B-Cut to 64 and then control G, B gain adjustment High
Light adjustment.
Light adjustment.
(10) All of the three mode
Let R-Gain to 192 and R, G, B-Cut to 64 and then control
G, B gain adjustment High Light adjustment.
G, B gain adjustment High Light adjustment.
(11) With volume button (+/-) you can adjust.
(12) After all adjustment finished, with Enter (
(12) After all adjustment finished, with Enter (
V
key) turn to
Ez-Adjust mode. Then with ADJ button, exit from
adjustment mode
adjustment mode
* Attachment:
(1) White Balance adjustment coordination and color
temperature.
(2) Gain Max Value is 192. So, Never make any Gain Value
over 192 and please fix one Value on 192, between R, G
and B.
and B.
- 10 -
Model Name
PZ950B-SA PZ750B-SB PZ570B-SA
Tool Option 1 50 INCH
32777
32809
32777
60 INCH
32781
32813
32781
Tool Option 2 50 INCH
65
65
65
60 INCH
65
65
65
Tool option 3
3551
3295
3551
Tool option 4
7320
7320
7352
Tool option 5
14921
14913
14921
Tool option 6
33625
857
33625
Area Option
(Country Group Code)
-
-
-
Country Group
BR
BR
TW
Country
Brazil
BR
BR
-
Chile
CL
CL
-
Peru
PE
PE
-
Colombia
-
-
CO
Panama
-
-
PN
CSM Color Coordinate
Temp
Color Coordinate
x
y
Cool
0.276
0.283
11000K
0.002
Medium
0.285
0.293
9300K
0.002
Warm
0.313
0.329
6500K
0.002
CSM
PLASMA
Cool
11000K
Medium
9300K
Warm
6500K
Click on the first or last page to see other 50PZ570B-SB (CHASSIS:PB12A) service manuals if exist.