Read LG 50PZ570B-SB (CHASSIS:PB12A) Service Manual online
8. Check Wireless function.
(1) Connect set and Dongle of Wireless to Cable of HDMI &
TTA 20Pin
(2) At OSD of SET, check the message like Fig 3.
(3) Detach Cable of Wireless Dongle
(3) Detach Cable of Wireless Dongle
9. Magic Motion Remote Controller
test
V
Required Equipment : RF Remote Controller for test
-* You must confirm the battery power of Remote
Controller before test
(1) If you select the ‘start key(Mute)’ on the controller, you can
pairing with the TV SET.
(2) You can check the cursor on the TV Screen, when select
the ‘OK Key’ on the controller
(3) You must remove the pairing with the TV Set by select
10. 3D Function Test
10-1. 3D pattern inspection
V
Required Equipment : Pattern Generator MSHG-600 or
MSPG-6100
V
Input MODE : HDMI mode NO. 872
V
Test Pattern No.83
(1) Please input 3D test pattern like below
(2) When 3D OSD appear automatically, then press OK
button on ADJ Remote Controller.
(3) Check the picture. The picture must be same as below.
10-2. 2D to 3D function test
V
Requirement pattern : Input Combination Pattern like Fig.1
in HDMI Input
(1) Enter the Swap Button(Yellow Color) (Refer Fig.3)
(2) Check the separated line in the SET
(2) Check the separated line in the SET
* When you enter the swap button. Depth value is set to
Maximum value(20) automatically
Worker has to enter the ETC Key Before using the swap
button
button
10-3. 3D RF Glasses, 3D RF Emitter Check
V
Requirement : Power Only Mode, MSHG-600
or MSPG-6100
- 12 -
Click on the first or last page to see other 50PZ570B-SB (CHASSIS:PB12A) service manuals if exist.