Read JBL SUB 250P (serv.man2) EMC - CB Certificate online
Page 44 of 57
Report No.: 11034065 001
IEC 60065 ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
2111
14.6.1
Switches and relays comply with UL 1054, UL
61058-1 or UL 508
61058-1 or UL 508
P
14.6.1
Mains switch or relay are rated for the total rated
current consumption of the apparatus
current consumption of the apparatus
N/A
14.6.1
Rating of a mains switch or relay in audio
apparatus intended for commercial use
apparatus intended for commercial use
N/A
14.6.2,
14.6.3,
14.6.4
14.6.3,
14.6.4
deleted.
N/A
14.6.5
A switch or relay that controls a mains socket-
outlet have a rating equal to the rated current
consumption of the apparatus plus the current
rating of the socket-outlet
outlet have a rating equal to the rated current
consumption of the apparatus plus the current
rating of the socket-outlet
N/A
14.6.6
Mains switches comply with (a), (b) or (c). The
contacts of a mains relay complies with (a), (b) or
(d). A switch that controls a mains receptacle
complies with (b) and a relay that controls a mains
receptacle complies with (b) or (d)
contacts of a mains relay complies with (a), (b) or
(d). A switch that controls a mains receptacle
complies with (b) and a relay that controls a mains
receptacle complies with (b) or (d)
N/A
14.6.6a
Switch or relay contacts have an rms current rating
equal to or greater than the peak inrush current of
the apparatus divided by 1.414
equal to or greater than the peak inrush current of
the apparatus divided by 1.414
N/A
14.6.6a
Switch or relay contacts have an rms current rating
equal to or greater than the peak inrush current of
the apparatus divided by 10, when:
equal to or greater than the peak inrush current of
the apparatus divided by 10, when:
- the rms current during normal operation
controlled by the switch is less than or equal to ½
the rms rating of the switch, and
controlled by the switch is less than or equal to ½
the rms rating of the switch, and
- the switch has double or multiple poles
controlling the mains current, either in series or
switching each mains line
controlling the mains current, either in series or
switching each mains line
N/A
14.6.6b
Switch or relay is TV rated
N/A
14.6.6c
Switch is located on the back of apparatus and is
not operable from a remote control
not operable from a remote control
N/A
14.6.6d
Relay is to be subjected to the Relay endurance
test
test
N/A
14.6.6.1
Peak inrush current test
N/A
14.6.6.2
Relay endurance test
N/A
14.6.7
Double pole switch controlling a.c. and d.c. circuits
N/A
14.7
The jointed test finger (figure 18) is used to
determine accessibility and operation of the
interlock
determine accessibility and operation of the
interlock
N/A
14.10.1
N/A
Click on the first or last page to see other SUB 250P (serv.man2) service manuals if exist.