ON STAGE 400P (serv.man4) - JBL Audio EMC - CB Certificate (repair manual). Page 68

 

 

- Page 3 of 5 - 

 

 

Report No.   100711 

 

 

TRF No. IECEN60950_1C 

 

 

3.4.8 

Vertically-mounted disconnect switches and 
circuit breakers are required to have the “on” 
position indicated by the handle in the up 
position. 

No switch acting as disconnect 
device. 
 

N 

3.4.11 

For computer room applications, equipment with 
battery systems capable of supplying 750 VA for 
five minutes are required to have a battery 
disconnect means that may be connected to the 
computer room remote power-off circuit. 

No batteries. 
 

N 

4.3.12 

The maximum quantity of flammable liquid stored 
in equipment is required to comply with NFPA 30.

No flammable liquids within the 
equipment. 
 

N 

4.3.13 

Equipment with lasers is required to meet the 
Code of Federal Regulations 21 CFR 1040 (and 
the Canadian Radiation Emitting Devices Act, 
REDR C1370). 

No laser in the equipment. 

N 

4.7 

For computer room applications, automated 
information storage systems with combustible 
media greater than 27 cubic feet are required to 
have a provision for connection of either 
automatic sprinklers or a gaseous agent 
extinguishing system with an extended 
discharge. 

The equipment has no 
combustible area greater than 27 
cubic feet. 

N 

4.7.3.1 

For computer room applications, enclosures with 
combustible material measuring greater than 0.9 
m

2

 or a single dimension greater than 1.8 m are 

required to have a flame spread rating of 50 or 
less. For other applications, enclosures with the 
same dimensions require a flame spread rating 
of 200 or less. 

The equipment has no 
combustible material greater 
than 0.93m² or single dimension 
greater than 1.8m. 
 
 
 

 

N 

Annex H  Equipment that produces ionizing radiation is 

required to comply with the Code of Federal 
Regulations, 21 CFR 1020 (and Canadian 
Radiation Emitting Devices Act, REDR C1370). 

The equipment does not produce 
ionizing radiation. 
 

N