Read JBL ON STAGE 400P (serv.man4) EMC - CB Certificate online
IEC 60950-1 (ed.1)
- Page 3 of 8 -
www.nemko.com
Report No. 100711
TRF No. IECEN60950_1C
4.7.201
Add
the following after Clause 4.7.3.6:
4.7.201 Resistance to fire – Alternative tests
4.7.201.1 General
Parts of non-metallic material shall be resistant to
ignition and spread of fire.
This requirement does not apply to decorative
trims, knobs and other parts unlikely to be ignited
or to propagate flames originating from inside the
apparatus, or the following:
a) Components that are contained in an enclosure
having a flammability category of FV-0 according
to AS/NZS 4695.707 and having openings only for
the connecting wires filling the openings
completely, and for ventilation not exceeding 1
mm in width regardless of length.
b) The following parts which would contribute
negligible fuel to a fire:
- small mechanical parts, the mass of which does
not exceed 4 g, such as mounting parts, gears,
cams, belts and bearings;
- small electrical components, such as capacitors
with a volume not exceeding 1750mm
ignition and spread of fire.
This requirement does not apply to decorative
trims, knobs and other parts unlikely to be ignited
or to propagate flames originating from inside the
apparatus, or the following:
a) Components that are contained in an enclosure
having a flammability category of FV-0 according
to AS/NZS 4695.707 and having openings only for
the connecting wires filling the openings
completely, and for ventilation not exceeding 1
mm in width regardless of length.
b) The following parts which would contribute
negligible fuel to a fire:
- small mechanical parts, the mass of which does
not exceed 4 g, such as mounting parts, gears,
cams, belts and bearings;
- small electrical components, such as capacitors
with a volume not exceeding 1750mm
3
, integrated
circuits, transistors and optocoupler packages, if
these components are mounted on material of
flammability category FV-1, or better, according to
AS/NZS 4695.707.
these components are mounted on material of
flammability category FV-1, or better, according to
AS/NZS 4695.707.
NOTE: In considering how to minimize propagation of fire and
what ‘small parts’ are, account should be taken of the
cumulative effect of small parts adjacent to each other for the
possible effect of propagating fire from one part to another.
what ‘small parts’ are, account should be taken of the
cumulative effect of small parts adjacent to each other for the
possible effect of propagating fire from one part to another.
Compliance shall be checked by the tests of
4.7.201.2, 4.7.201.3, 4.7.201.4 and 4.7.201.5.
For the base material of printed boards,
compliance shall be checked by the test of
4.7.201.5.
The tests shall be carried out on parts of non-
metallic material which have been removed from
the apparatus. When the glow-wire test is carried
out, the parts shall be placed in the same
orientation as they would be in normal use.
These tests are not carried out on internal wiring.
4.7.201.2, 4.7.201.3, 4.7.201.4 and 4.7.201.5.
For the base material of printed boards,
compliance shall be checked by the test of
4.7.201.5.
The tests shall be carried out on parts of non-
metallic material which have been removed from
the apparatus. When the glow-wire test is carried
out, the parts shall be placed in the same
orientation as they would be in normal use.
These tests are not carried out on internal wiring.
4.7.201.2 Testing of non-metallic materials
Parts of non-metallic material shall be subject to
the glow-wire test of AS/NZS 60695.2.11 which
shall be carried out at 550°C.
the glow-wire test of AS/NZS 60695.2.11 which
shall be carried out at 550°C.
All materials have suitable flame
class, no testing required.
class, no testing required.
P
Click on the first or last page to see other ON STAGE 400P (serv.man4) service manuals if exist.