ON BEAT XTREME (serv.man8) - JBL Audio EMC - CB Certificate (repair manual). Page 121

 

Page 8 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

Replacement: 

Replace the paragraph after NOTE 2 by the 
following. 

MAINS socket-outlets and interconnection couplers 
mounted on CLASS 0I and CLASS II apparatus 
shall not permit connection of CLASS I apparatus. 

No mains socket-outlets

 

Replacement: 

Replace the paragraph before NOTE 3 by the 
following. 

MAINS socket-outlets and interconnection couplers 
mounted on CLASS I apparatus shall be provided 
with protective earthing contacts which are reliably 
connected to the PROTECTIVE EARTHING 
TERMINAL or contact of the apparatus. If not, it 
shall not permit connection of CLASS I apparatus. 

Class II apparatus 

Replacement: 

Replace NOTE 4 by the following. 

NOTE 4  Socket-outlets not allowing the 
connection of CLASS I apparatus can be designed, 
for instance, similar to IEC 60906-1, standard 
sheets 3-1 or 3-2, or according to IEC 60320-2-2, 
standard sheets D or H. 

 

15.1.2 Deletion: 

Delete the following sentence in NOTE.  

An example of a connector not meeting the 
requirements of this sub clause is the so-called 
"banana" plug. 

 

— 

15.1.3 Replacement: 

Replace the references, “IEC 60083 [1], IEC 
60320, IEC 60884, IEC 60906” by “JIS C 8282 
(corresponding to IEC 60884), JIS C 8303, IEC 
60320 and IEC 60906”. 

 

15.2 Addition: 

Add “and CLASS 0I EQUIPMENT” after the words, 
“CLASS I EQUIPMENT” 

Class II apparatus