Read Sharp AR-122EN (serv.man8) Parts Guide online
CONTENTS
Parts marked with “
” are important for maintaining the safety of the machine. Be sure to replace these parts
with the replacement parts specified to maintain the safety and performance of the machine.
SHARP CORPORATION
SERVICE MANUAL
CODE : 00ZAR157ENA1E
DIGITAL LASER COPIER/
PRINTER
PRINTER
AR-122E N
AR-123E
AR-152E N
AR-153E N
AR-123E
AR-152E N
AR-153E N
MODEL
AR-157E N
(AR-157E N)
The AR-122E N/AR-123E/AR-152E N/AR-153E N/AR-157E N Service Manual describes
only changed from AR-122E/AR-152E/AR-153E/AR-157E Service Manual.
Service Manual (Code: 00ZAR157E/A1E)
[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
• Parts Guide
MODEL
Reference MODEL
1
AR-122E N
AR-122E
2
AR-123E
AR-153E
3
AR-152E N
AR-152E
4
AR-153E N
AR-153E
5
AR-157E N
AR-157E
AR-122E N/AR-123E/AR-153E N/AR-157E N GENERAL 1 - 2
[1] GENERAL
1. Major functions
Configurations
Descriptions of items
CPM:
Copy speed (Copies Per Minute)
SB/MB:
SB = Manual feed single bypass, MB = Manual feed multi bypass
2 tray:
Second cassette unit.
SPF: Original
feed
unit
R-SPF:
Duplex original feed unit
Color scanner:
Color scanner function
GDI printer:
GDI printer function with USB.
PCL printer:
PCL printer function with USB.
SOPM:
Scan Once Print Many function (Many copies are made by one scan.)
Duplex:
Auto duplex copy function
Memory:
Standard page memory
FAX: FAX
function.
Descriptions of table
: Standard
provision
: No function or no option available
Opt: Option
∗
1:
AL-12PK/M
∗
2:
AR-PG2
Item
CPM
SB/MB
2 Tray
SPF
R-SPF
Color
Scanner
GDI
printer
PCL
printer
SOPM
Duplex
Memory
FAX
Model
AR-122E N
AR-122E N
12CPM
SB
Opt
∗
1
Opt
∗
1
8M
AR-123E
12CPM
SB
Opt
Opt
Opt
∗
1
Opt
∗
1
8M
AR-152E N
15CPM
SB
Opt
∗
1
Opt
∗
1
8M
AR-153E N
15CPM
MB
Opt
Opt
Opt
∗
2
Opt
∗
2
8M
AR-157E N
15CPM
MB
Opt
∗
2
Opt
∗
2
16M
AR-122E N/123E/152E N/153E N
AR-157E N
AR-SP5
AR-D16
(Options)
AR-PG2
AL-12PK/M
AR-122E N/AR-123E/AR-153E N/AR-157E N GENERAL 1 - 3
2. Maintenance display system
*1: Installation of a new toner cartridge allows to display the remaining quantity.
The remaining toner indication is based on the number of revolutions of the toner motor.
3. Remaining toner indication
• The remaining toner indication is based on the number of revolutions of the toner motor.
• The toner END indication appears when the END is detected by the toner sensor, or when the number of revolutions of the toner motor reaches a
given number (equivalent to 8K), whichever comes first.
Toner
Life
8K
Remaining quantity
check *1
check *1
a. Press and hold the density adjustment LIGHT key for more than 5 sec, and the machine will enter the user
program mode.
b. Press and hold the "%" key for more than 5 sec, and the remaining quantity will be displayed on the copy
quantity display in one of the following levels: (Remaining quantity display levels: 100%, 75%, 50%, 25%,
10%, LO)
10%, LO)
c. Press the density adjustment LIGHT key to cancel.
Remaining quantity
NEAR EMPTYAbout 10%
EMPTY
LED
ON
Flash
Machine
Operation allowed
Stop
Developer
Life
25K
LED
ON at 25K of the developer count.
Machine
Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup.
(If Stop is selected, the LED will flash and stop at 25K.)
* Default: Not Stop
* Clear: SIM 24-06
(If Stop is selected, the LED will flash and stop at 25K.)
* Default: Not Stop
* Clear: SIM 24-06
Maintenance
LED
Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
* Default: 25K
* Clear: SIM 20-1
* Default: 25K
* Clear: SIM 20-1
Machine
Not stop.
TONER FULL
Remaining toner indication
Display for users
Indicator
100%
75%
50%
25%
Lo
LOW LEVEL
100-90%
89-75%
74-50%
49-25%
24-10%
10%
10 sheets
NEAR END
END
AR-122E N/AR-123E/AR-153E N/AR-157E N GENERAL 1 - 4
4. Additional simulation and trouble code
• Simulation
• Trouble codes
Main
code
code
Sub
code
Content
26
55
CRUM Destination Indication
When the simulation is executed, the CRUM destination currently set (saved) in the CRUM chip is displayed.
When the simulation is executed, the CRUM destination currently set (saved) in the CRUM chip is displayed.
Main code
Sub code
Trouble content
F2
04
Toner cartridge error
U2
40
Main IC chip read error
Code number
Setup
00
No set
01
BTA-A
02
BTA-B
03
BTA-C
99
Conversion
