Read JBL ON BEAT XTREME (serv.man8) EMC - CB Certificate online
Page 6 of 12
Report No.: 171153
ATTACHMENT 7
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
14.5.3 Replacement:
Replace IEC 60730-1 by JIS C 9730-1
(corresponding to IEC 60730-1).
(corresponding to IEC 60730-1).
No PTC’s thermistors.
N/A
14.5.4 Replacement:
Replace IEC 60127 by “IEC 60127 or JIS C 6575 ”.
Only standard fuse used.
N/A
14.6.1 Addition:
Add the following paragraph after NOTE.
The following manually operated mechanical
switches shall meet the requirements specified in
item a) or b) below.
- the controlling current exceeds 0.2 A r.m.s a.c. or
d.c.
- the voltage across the open switch contacts
exceeds 35 Vpeak ac or 24 Vdc.
switches shall meet the requirements specified in
item a) or b) below.
- the controlling current exceeds 0.2 A r.m.s a.c. or
d.c.
- the voltage across the open switch contacts
exceeds 35 Vpeak ac or 24 Vdc.
No such switch
N/A
14.6.1 Replacement:
In item a), replace IEC 61058-1 by “IEC 61058-1 or
JIS C 4526-1:1999”.
JIS C 4526-1:1999”.
N/A
14.6.2 Replacement:
Replace IEC 61058-1 by “IEC 61058-1 or JIS C
4526-1:1999”.
4526-1:1999”.
N/A
14.6.3 Replacement:
Replace IEC 61058-1 by “ IEC 61058-1 or JIS C
4526-1:1999”.
4526-1:1999”.
N/A
14.6.5 Replacement:
Replace IEC 61058-1 by “ IEC 61058-1 or JIS C
4526-1:1999”.
4526-1:1999”.
N/A
14.7 Replacement:
Replace IEC 60950 by JIS C 6950:2006.
No safety interlocks.
N/A
Click on the first or last page to see other ON BEAT XTREME (serv.man8) service manuals if exist.