Read JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate online
Issue Date:
2012-10-23
Page 26 of 41
Report Reference #
E204594-A37-CB-1
IEC 60950-1:2005
SubClause Difference + Test
Result - Remark
Verdict
This report issued under the responsibility of UL
USA / Canada - Differences to IEC 60950-1:2005 (2nd Edition); Am 1:2009
1.1
Equipment able to be installed in
accordance with the National Electrical Code
ANSI/NFPA 70 and the Canadian Electrical Code,
Part1, and when applicable, the National Electrical
Safety Code, IEEE C2.
Pass
1.1.1
Equipment able to be installed in
accordance with ANSI/NFPA 75 and NEC Art. 645
unless intended for use outside of computer room
and provided with such instructions.
N/A
1.1.2
Equipment in wire-line communication
facilities serving high-voltage electric power
stations operating at greater than 1kV are
excluded.
N/A
1.1.2
Special requirements apply to equipment
intended for use outdoors.
N/A
1.4.14
For PLUGGABLE EQUIPMENT TYPE A,
the protection in the installation is assumed to be
20 A.
N/A
1.5.1
All IEC standards for components identified
in Annex P.1 replaced by the relevant requirements
of CSA and UL component standards in Annex P.1.
Pass
1.5.1
All IEC standards for components identified
in Annex P.2 alternatively satisfied by the relevant
requirements of CSA and UL component standards
in Annex P.2.
Pass
1.5.5
Interconnecting cables acceptable for the
application regarding voltage, current, temperature,
flammability, mechanical serviceability and the like.
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.