Read JBL DSC 1000 EMC - CB Certificate online
Page 33 of 47
Report No: JSH0406744-001.
EN 60065
Clause
Requirement - Test
Result - Remark
Verdict
5.1
Italy
The following requirements shall be fulfilled:
- The power consumption in Watts (W) shall be
indicated on TV receivers and in their instruction
for use (Measurement according to EN 60555-2)
The following requirements shall be fulfilled:
- The power consumption in Watts (W) shall be
indicated on TV receivers and in their instruction
for use (Measurement according to EN 60555-2)
NOTE EN 60555-2 has since been replaced by IEC 60107-
1:1997.
1:1997.
- TV receivers shall be provided with an
instruction for use, schematic diagrams
and adjustments procedure in Italian language.
- Marking for controls and terminals shall be in
Italian language. Abbreviation and international
symbols are allowed provided that they are
explained in the instruction for use.
- The ECC manufacturers are bound to issue a
conformity declaration according to the above
requirements in the instruction manual. The
correct statement for conformity to be written in
the instruction manual, shall be:
Questo apparecchio è fabbricato nella CEE nel
rispetto delle disposizioni del D.M. marzo 1992
ed è in particolare conforme alle prescrizioni
dell'art.
1 dello stesso D.M.
- The first importers of TV receivers
manufactured outside EEC are bound to submit
the TV receivers for previous conformity
certification to the Italian Post Ministry (PP.TT).
The TV receivers shall have on the backcover the
certification number in the following form:
D.M. 26/03/1992 xxxxx/xxxxx/S or T or pT
S for stereo
T for teletext
pT for retrofitable teletext
Justification:
Ministerial Decree of 26 March 1992: National
rules for television receivers
trade.
instruction for use, schematic diagrams
and adjustments procedure in Italian language.
- Marking for controls and terminals shall be in
Italian language. Abbreviation and international
symbols are allowed provided that they are
explained in the instruction for use.
- The ECC manufacturers are bound to issue a
conformity declaration according to the above
requirements in the instruction manual. The
correct statement for conformity to be written in
the instruction manual, shall be:
Questo apparecchio è fabbricato nella CEE nel
rispetto delle disposizioni del D.M. marzo 1992
ed è in particolare conforme alle prescrizioni
dell'art.
1 dello stesso D.M.
- The first importers of TV receivers
manufactured outside EEC are bound to submit
the TV receivers for previous conformity
certification to the Italian Post Ministry (PP.TT).
The TV receivers shall have on the backcover the
certification number in the following form:
D.M. 26/03/1992 xxxxx/xxxxx/S or T or pT
S for stereo
T for teletext
pT for retrofitable teletext
Justification:
Ministerial Decree of 26 March 1992: National
rules for television receivers
trade.
NOTE The ministerial decree above contains additional, but
not safety relevant requirements.
N
14
Sweden
The following is added:
Switches containing mercury such as
thermostats, relays and level controllers are not
allowed.
Justification:
Ordinance (1990:944) on Prohibition in cnnection
with Handling, Importation and Exportation of
Chemical Products (Certain Cases)
The following is added:
Switches containing mercury such as
thermostats, relays and level controllers are not
allowed.
Justification:
Ordinance (1990:944) on Prohibition in cnnection
with Handling, Importation and Exportation of
Chemical Products (Certain Cases)
Only approved MOMS is
provided.
provided.
P
Click on the first or last page to see other DSC 1000 service manuals if exist.