Read JBL DSC 1000 EMC - CB Certificate online
Page 31 of 47
Report No: JSH0406744-001.
EN 60065
Clause
Requirement - Test
Result - Remark
Verdict
15.1.1
Norway
Mains socket-outlets mounted on CLASS II
apparatus shall comply with the specifications
given in CEE Publ. 7 as far as applicable, with
the following amendments:
§ 8 Dimensions
a 2,5 A 250 V two-pole socket-outlets for
electronic apparatus shall comply
with the enclosed Standard Sheet I.
See EN 60065:2002
Other dimensions according to CEE Publication 7
Standard Sheet I "Portable Single-Way Socket-
Outlets".
§ 24 Mechanical strength
a 2,5 A, 250 V socket-outlets for CLASS II
electronic apparatus are tested as specified in
12.1.3 of EN 60065. Also the protecting rim shall
be tested
Justification:
Act of 24 May 1929 relating to supervision of
electrical installation
(TEA 1929/FEL 1998).
Mains socket-outlets mounted on CLASS II
apparatus shall comply with the specifications
given in CEE Publ. 7 as far as applicable, with
the following amendments:
§ 8 Dimensions
a 2,5 A 250 V two-pole socket-outlets for
electronic apparatus shall comply
with the enclosed Standard Sheet I.
See EN 60065:2002
Other dimensions according to CEE Publication 7
Standard Sheet I "Portable Single-Way Socket-
Outlets".
§ 24 Mechanical strength
a 2,5 A, 250 V socket-outlets for CLASS II
electronic apparatus are tested as specified in
12.1.3 of EN 60065. Also the protecting rim shall
be tested
Justification:
Act of 24 May 1929 relating to supervision of
electrical installation
(TEA 1929/FEL 1998).
N
15.1.1
United Kingdom
Apparatus which is fitted with a flexible cable or
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a "standard plug" in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
Apparatus which is fitted with a flexible cable or
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a "standard plug" in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
NOTE "Standard plug" is defined in SI 1768:1994 and
essentially means an approved plug
conforming to BS 1363 or an approved conversion plug.
Justification:
SI 1768: 1994
SI 1768: 1994
P
J.2
Norway
After Table J.1 the following is added:
In Norway, due to the IT power distribution
system used, the a.c. MAINS supply voltage is
considered to be equal to the line-to-line voltage,
and will remain 230 V in case of a single earth
fault.
Justification:
Based on a use in Norway of an IT power
distribution system where the neutral
is not provided
After Table J.1 the following is added:
In Norway, due to the IT power distribution
system used, the a.c. MAINS supply voltage is
considered to be equal to the line-to-line voltage,
and will remain 230 V in case of a single earth
fault.
Justification:
Based on a use in Norway of an IT power
distribution system where the neutral
is not provided
P
Click on the first or last page to see other DSC 1000 service manuals if exist.