CS680 - JBL Audio EMC - CB Certificate (repair manual). Page 12

Read JBL CS680 EMC - CB Certificate online

 
 
page 8 of 34 
Ref.No.:610604  
IEC 60065 
Clause 
Requirement - Test 
Result - Remark 
Verdict 
 
 
TRF No.: I60065__C 
 
9.1.7 
Enclosure sufficiently resistant to external force 
 
 
Test probe 11 of IEC 61032 for 10 s (50 N) 
 
 
Test hook of fig. 4 for 10 s (20 N) 
 
 
30 mm diameter test tool for 5 s (100 or 250 N)  ... :  
N/A 
9.2 
No hazard after removing a cover by hand 
 
N/A 
 
10 
INSULATION REQUIREMENTS  
 
 
(See appended table) 
 
10.1 
Insulation resistance (M
Ω) at least 2 MΩ min. after 
surge test for basic and 4 M
Ω min. for reinforced 
insulation 
>100M
Ω 
10.2 
Humidity treatment 48 h or 120 h 
Both 48 and 120 h ( see also 
page 32 ) 
10.3 
Insulation resistance and dielectric strength 
 
 
11 
FAULT CONDITIONS 
 
    (See 
appended 
table) 
 
11.1 
No shock hazard under fault conditions 
 
11.2 
Heating under fault condition 
 
 
No hazard from softening solder 
 
11.2.1 
Measurement of temperature rises 
 
11.2.2 
Temperature rise of accessible parts 
 
11.2.3 
Temperature rise of parts, other than windings, 
providing electrical insulation 
 P 
 
Temperature rise of printed circuit boards (PCB) 
exceeding the limits of Table 2 by max. 100 K for 
max. 5 min 
 N/A 
 
a) Temperature rise of printed circuit boards (PCB) 
to 20.1.3, exceeding the limits of Table 2 by not 
more than 100 K for an area not greater than 
2 cm
2
 
 N/A 
 
b) Temperature rise of printed circuit boards (PCB) 
to 20.1.3 up to 300 K for an area not greater than 
2 cm
2
 for a maximum of 5 min 
 N/A 
 
Meets all the special conditions if conductors on 
printed circuit boards are interrupted 
At Uin=198V, voltage across 
interruption <50Vp 
At Uin=253V, no interruption, 
mains fuse broke 
(see table 11)
 
11.2.4 
Temperature rise of parts acting as a support or 
mechanical barrier 
 P 
Page of 48
Display

Click on the first or last page to see other CS680 service manuals if exist.