Read Harman Kardon DRIVE AND PLAY 2 (serv.man3) EMC - CB Certificate online
Report No. 078214R-RFCEP02V01
Page : 19 of 48
Version:1.0
5.3. Test
Level
Item Environmental
Phenomena
Units
Test Specification Performance Criteria
Enclosure Port
Radio-Frequency
Electromagnetic Field
Amplitude Modulated
MHz
V/m(Un-modulated, rms)
% AM (1kHz)
80-1000
1400-2000
3
80
A
5.4. Test
Procedure
The EUT and load, which are placed on a table that is 0.8 meter above ground, are placed with
one coincident with the calibration plane such that the distance from antenna to the EUT was 3
meters.
Both horizontal and vertical polarization of the antenna and four sides of the EUT are set on
measurement.
In order to judge the EUT performance, a CCD camera is used to monitor EUT screen, and a
plastic tube to monitor the sound output.
one coincident with the calibration plane such that the distance from antenna to the EUT was 3
meters.
Both horizontal and vertical polarization of the antenna and four sides of the EUT are set on
measurement.
In order to judge the EUT performance, a CCD camera is used to monitor EUT screen, and a
plastic tube to monitor the sound output.
All the scanning conditions are as follows:
Condition
of
Test
Remarks
1. Field Strength
6 V/m Level 2
2. Radiated Signal
AM 80% Modulated with 1kHz sinusoidal audio signal
3. Scanning
Frequency
80MHz - 1000MHz, 1400MHz - 3000MHz
4 Dwell
Time
3 Seconds
5. Frequency step size
∆ f
: 1%
6. The rate of Swept of Frequency
1.5 x 10
-3
decades/s
5.5. Test
Specification
According to EN 61000-4-3:2002+A1: 2002
5.6. Uncertainty
±
6.17 %
5.7. Test
Result
The measurement of the radiated susceptibility was investigated and test result was shown in
section 12. The acceptance criterion was met and the EUT passed the test.
section 12. The acceptance criterion was met and the EUT passed the test.
Click on the first or last page to see other DRIVE AND PLAY 2 (serv.man3) service manuals if exist.