DRIVE AND PLAY 2 (serv.man3) - Harman Kardon Car Audio EMC - CB Certificate (repair manual)

drive and play 2 (serv.man3) emc - cb certificate
Model
DRIVE AND PLAY 2 (serv.man3)
Pages
48
Size
2.03 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Car Audio
File
drive-and-play-2-sm3.pdf
Date
Next: Harman Kardon DVD 1 Technical Bulletin

Read Harman Kardon DRIVE AND PLAY 2 (serv.man3) EMC - CB Certificate online

 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 1 of 48 
 
Version:1.0 
 
 
 
 
 
 
 
Test Report
 
 
 
 
 
Product Name drive+play 2 
Model No. 
DP2EU 
 
 
 
 
Applicant 
harman Kardon Inc 
Address 
250 Crossways Park Drive Woodbury, NY 11797-2015, USA 
 
 
 
 
Date of Receipt 
2007/08/15 
Issued Date 
2007/09/20 
Report No. 
078214R-RFCEP02V01 
 
 
 
The Test Results relate only to the samples tested. 
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
 
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 2 of 48 
 
Version:1.0 
 
 
Test Report Certification 
 
Issued Date: 2007/09/20 
 
Report No.: 078214R-RFCEP02V01 
 
 
 
Product Name 
drive+play 2 
Applicant 
harman Kardon Inc 
Address 
250 Crossways Park Drive Woodbury, NY 11797-2015, USA 
Manufacturer 
Kinpo Electronics, Inc. 
Model No. 
DP2EU 
Rated Voltage 
AC 230V/50Hz   
EUT working Voltage 
DC 12V 
Trade Name 
harman kardon 
Applicable Standard 
ETSI EN 301 489-17:V1.2.1 (2002-08) 
ETSI EN 301 489-1:V1.6.1 (2005-09) 
Test Result 
Complied 
 
The Test Results relate only to the samples tested.
 
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. 
 
Documented By 
: 
 
 
 
 
( Engineering Adm. Specialist /   
Genie Chang  )  
 
Tested By 
: 
 
 
 
 ( Assistant
 Engineer /  Johnson Liao 
)    
Approved By 
: 
 
 
 
 
( Deputy Manager / Vincent Lin) 
 
 
0914 
 
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 3 of 48 
 
Version:1.0 
 
    TA B L E  O F  C O N T E N T S  
 
Description                                                                                                                                Page 
 
1.
 
GENERAL INFORMATION .................................................................................................... 6
 
1.1.
 
EUT Description............................................................................................................................6
 
1.2.
 
Tested System Details....................................................................................................................8
 
1.3.
 
Configuration of Test System ........................................................................................................9
 
1.4.
 
EUT Exercise Software .................................................................................................................9
 
1.5.
 
Test Facility .................................................................................................................................10
 
2.
 
Conducted Emission..................................................................................................................11
 
2.1.
 
Test Equipmen.............................................................................................................................11
 
2.2.
 
Test Setup ....................................................................................................................................11
 
2.3.
 
Limits ..........................................................................................................................................12
 
2.4.
 
Test Procedure .............................................................................................................................13
 
2.5.
 
Test Specification ........................................................................................................................13
 
2.6.
 
Uncertainty ..................................................................................................................................13
 
2.7.
 
Test Result ...................................................................................................................................13
 
3.
 
Radiated Emission.................................................................................................................... 14
 
3.1.
 
Test Equipment............................................................................................................................14
 
3.2.
 
Test Setup ....................................................................................................................................14
 
3.3.
 
Limits ..........................................................................................................................................15
 
3.4.
 
Test Procedure .............................................................................................................................15
 
3.5.
 
Test Specification ........................................................................................................................15
 
3.6.
 
Uncertainty ..................................................................................................................................15
 
3.7.
 
Test Result ...................................................................................................................................15
 
4.
 
Electrostatic Discharge (ESD) ................................................................................................. 16
 
4.1.
 
Test Equipment............................................................................................................................16
 
4.2.
 
Test Setup ....................................................................................................................................16
 
4.3.
 
Test Level ....................................................................................................................................16
 
4.4.
 
Test Procedure .............................................................................................................................17
 
4.5.
 
Test Specification ........................................................................................................................17
 
4.6.
 
Uncertainty ..................................................................................................................................17
 
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 4 of 48 
 
Version:1.0 
 
4.7.
 
Test Result ...................................................................................................................................17
 
5.
 
Radiated Susceptibility (RS).................................................................................................... 18
 
5.1.
 
Test Equipment............................................................................................................................18
 
5.2.
 
Test Setup ....................................................................................................................................18
 
5.3.
 
Test Level ....................................................................................................................................19
 
5.4.
 
Test Procedure .............................................................................................................................19
 
5.5.
 
Test Specification ........................................................................................................................19
 
5.6.
 
Uncertainty ..................................................................................................................................19
 
5.7.
 
Test Result ...................................................................................................................................19
 
6.
 
Surge.......................................................................................................................................... 20
 
6.1.
 
Test Equipment............................................................................................................................20
 
6.2.
 
Test Setup ....................................................................................................................................20
 
6.3.
 
Test Level ....................................................................................................................................20
 
6.4.
 
Test Procedure .............................................................................................................................21
 
6.5.
 
Test Specification ........................................................................................................................21
 
6.6.
 
Uncertainty ..................................................................................................................................21
 
6.7.
 
Test Result ...................................................................................................................................21
 
7.
 
Conducted Susceptibility (CS)................................................................................................. 22
 
7.1.
 
Test Equipment............................................................................................................................22
 
7.2.
 
Test Setup ....................................................................................................................................22
 
7.3.
 
Test Level ....................................................................................................................................22
 
7.4.
 
Test Procedure .............................................................................................................................23
 
7.5.
 
Test Specification ........................................................................................................................23
 
7.6.
 
Uncertainty ..................................................................................................................................23
 
7.7.
 
Test Result ...................................................................................................................................23
 
8.
 
EMC Reduction Method During Compliance Testing .......................................................... 24
 
9.
 
Test Result ................................................................................................................................. 25
 
9.1.
 
Test Data of Conducted Emission ...............................................................................................26
 
9.2.
 
Test Photograph...........................................................................................................................28
 
9.3.
 
Test Data of Radiated Emission ..................................................................................................29
 
9.4.
 
Test Photograph...........................................................................................................................30
 
9.5.
 
Test Data of Electrostatic Discharge ...........................................................................................31
 
Page of 48
Display

Download Harman Kardon DRIVE AND PLAY 2 (serv.man3) EMC - CB Certificate

Here you can read online and download Harman Kardon DRIVE AND PLAY 2 (serv.man3) EMC - CB Certificate in PDF. DRIVE AND PLAY 2 (serv.man3) emc - cb certificate will guide through the process and help you recover, restore, fix, disassemble and repair Harman Kardon DRIVE AND PLAY 2 (serv.man3) Car Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

DRIVE AND PLAY 2 (serv.man3) Service Manuals

Preview DownloadPagesSize
DRIVE AND PLAY 2 (serv.man2) EMC - CB Certificate 2 73.99 KB
DRIVE AND PLAY 2 Parts List 1 49.38 KB

Random: