Read Harman Kardon SIGNATURE 1.0 (serv.man2) User Guide / Operation Manual online
Rear Panel Connections
4
Signature 1.0
Rear Panel Connections
IMPORTANT NOTE: Never make or remove any connections to the Signature 1.0 with the Master Power Switch “ON”.
Make certain that power amplifiers connected to the 1.0 are turned off when making or removing any connections. This
eliminates the risk of possible damage to speakers or other system components.
Make certain that power amplifiers connected to the 1.0 are turned off when making or removing any connections. This
eliminates the risk of possible damage to speakers or other system components.
When making connections to the Signature 1.0 make certain that the plugs are firmly seated into the jacks. This prevents
intermittent connections which may interfere with performance.
intermittent connections which may interfere with performance.
INPUTS
¡
Balanced:
Connect the Balanced output of analog
audio devices to these Balanced inputs.
™
CD:
Connect the analog output of a CD player to these
inputs.
£
Tape 1:
Connect the analog output of a tape player to
these inputs.
¢
Tape 2:
Connect the analog output of a tape player to
these inputs.
∞
Tuner:
Connect the analog output of a tuner / radio
receiver to these inputs.
§
TV:
Connect the analog output of a TV or VCR to
these inputs.
¶
Phono MM:
Connect the output from a Turntable
equipped with a Moving Magnet or a HIGH OUTPUT
Moving Coil cartridge to these inputs.
Moving Coil cartridge to these inputs.
•
Phono MC:
Connect the output from a Turntable
equipped with a LOW OUTPUT Moving Coil cartridge to
these inputs.
these inputs.
ª
Phono GND:
Connect the ground wire from a
Turntable to this ground screw.
‚
MM / MC selector:
Select with this switch from
which of the phono inputs
¶
or
•
the audio signal will
be received.
⁄
7.1 Surround:
Connect the analog output from any
external surround sound decoder to these
8
inputs. Make
certain that channels are connected to a matching input.
(e.g., front left to front left, center to center, etc.)
(e.g., front left to front left, center to center, etc.)
NOTE: The 1.0 does NOT have an internal decoder for
any surround sound format. However the 1.0 accept
analog signals from ANY kind of external decoder like
Dolby Digital (AC3), DTS, or any future formats with up
to 8 discrete channels. The 1.0 only adjust the volume on
these 8 channels, before the signal is send out to the
connected power amplifiers.
any surround sound format. However the 1.0 accept
analog signals from ANY kind of external decoder like
Dolby Digital (AC3), DTS, or any future formats with up
to 8 discrete channels. The 1.0 only adjust the volume on
these 8 channels, before the signal is send out to the
connected power amplifiers.
• ¶
‚
ª
™ £ ¢ ∞
§
¡
⁄
›
fi
‹
¤
°
fl
‡
Click on the first or last page to see other SIGNATURE 1.0 (serv.man2) service manuals if exist.