SIGNATURE 1.0 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual. Page 4

2

)

1 2

3

7

5

6

#

8

9

4

!

@

1 

To turn the unit on, press this switch

in until it latches and is flush with the front panel. To turn
the unit off press in briefly, and the switch will pop out.
Once this switch is "ON" you may use the remote or
standby switch to turn the 1.0 on or off.

2 

Press to turn the unit on from Standby.

Press again to return to Standby. In order for this switch to
operate, 

1

must be "ON", as indicated by

the amber 

5

.

3

This sensor receives

commands from the infrared remote control. Make certain
that it is not blocked by cabinets, smoked glass or doors
or other objects that may interfere with the line of sight
from the remote.

4

Turn to the right or left to raise or lower

volume. 
Do not block the motion of the knob, as it turns to
respond to the remote control commands.

5

When this indicator lights in an amber

color, the 1.0 is in Standby, ready to be turned on when

2

, or the remote 

a

is pressed. When

the 

is out, but the 

6

is

illuminated in blue, the unit is on. When both indicators
are dark, the 1.0 is fully off, indicating that 

1

is "OFF" or the 1.0 is not plugged into a live AC power

source.

6 

This indicator is illuminated in blue

when the 1.0 is in full operation.

7 

Press to select source.

8 

Press to select the source from which you

want to record the audio signal. The yellow 

!

will

flash until any of the 

7

are pressed.

The green 

#

below the pressed 

7

will light to indicate the selected record source. 

9 

Press to temporarily silence the audio output.

Press again to return to normal operation. When Mute is
activated, the feed to any recorders connected will remain
uninterrupted. When Mute is engaged the 

@

lights

in a red color.

) 

Row of LEDs. The LED above the audio

source selected for listening will light in a blue color.

! 

This yellow LED will flash, until you have selected the

source you want to record from.

@ 

This LED will light in a red color when MUTE is

engaged.