Read Harman Kardon SIGNATURE 1.0 (serv.man2) User Guide / Operation Manual online
Safety Information
1
Signature 1.0
Important Safety Information
Verify Line Voltage Before Use
This Signature 1.0 has been designed for use with
220-240-volt AC current. Connection to a line voltage
other than that for which it is intended can create a safety
and fire hazard, and may damage the unit.
220-240-volt AC current. Connection to a line voltage
other than that for which it is intended can create a safety
and fire hazard, and may damage the unit.
If you have any questions about the voltage requirements
for your specific model, or about the line voltage in your
area, contact your selling dealer before plugging the unit
into a wall outlet.
for your specific model, or about the line voltage in your
area, contact your selling dealer before plugging the unit
into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord attached
to your unit. We do not recommend that extension cords
be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets or place
heavy objects on them. Damaged power cords should be
replaced immediately with cords meeting factory
specifications.
to your unit. We do not recommend that extension cords
be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets or place
heavy objects on them. Damaged power cords should be
replaced immediately with cords meeting factory
specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet,
always pull the plug, never pull the cord. If you do not
intend to use the unit for any considerable length of time,
disconnect the plug from the AC outlet.
always pull the plug, never pull the cord. If you do not
intend to use the unit for any considerable length of time,
disconnect the plug from the AC outlet.
Do Not Open The Cabinet
There are no user-serviceable components inside this
product. Opening the cabinet may present a shock hazard,
and any modification to the product will void your
guarantee. If water or any metal object such as a paper
clip, wire or a staple accidentally falls inside the unit,
disconnect it from the AC power source immediately, and
consult an authorized service station.
product. Opening the cabinet may present a shock hazard,
and any modification to the product will void your
guarantee. If water or any metal object such as a paper
clip, wire or a staple accidentally falls inside the unit,
disconnect it from the AC power source immediately, and
consult an authorized service station.
Cleaning
When the unit gets dirty, wipe it with a clean, soft dry
cloth. If necessary, wipe it with a soft cloth dampened
with mild soapy water, then a fresh cloth with clean
water. Wipe dry immediately with a dry cloth. NEVER
use benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.
cloth. If necessary, wipe it with a soft cloth dampened
with mild soapy water, then a fresh cloth with clean
water. Wipe dry immediately with a dry cloth. NEVER
use benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.
Installation Location
■ To assure proper operation, and to avoid the potential
for safety hazards, place the unit on a firm and level
surface. When placing the unit on a shelf, be certain
that the shelf and any mounting hardware can support
the weight of the product.
surface. When placing the unit on a shelf, be certain
that the shelf and any mounting hardware can support
the weight of the product.
■ Make certain that proper space is provided both above
and below the unit for ventilation. If this product will be
installed in a cabinet or other enclosed area, make certain
that there is sufficient air movement within the cabinet.
installed in a cabinet or other enclosed area, make certain
that there is sufficient air movement within the cabinet.
■ Do not place the unit directly on a carpeted surface.
■ Avoid installation in extremely hot or cold locations, or
an area that is exposed to direct sunlight or heating
equipment.
equipment.
■ Avoid moist or humid locations.
■ Do not obstruct the ventilation slots on the top of the
unit, or place objects directly over them.
Moving The Unit
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and make
certain that you disconnect the unit from the AC outlet.
interconnection cords with other components, and make
certain that you disconnect the unit from the AC outlet.
Declaration of Conformity
We, Harman Kardon Europe A/S
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
described in this owner’s manual is in compliance
with technical standards:
EN 55 013/A12/8.1994
EN 55 020/12.1994
EN 55 022/5.1995
EN 61 000-3-2/4.1995
EN 61 000-3-3/1.1995
Steen Michaelsen
Harman Kardon Europe A/S
Birkerød. DENMARK. 1/99
Click on the first or last page to see other SIGNATURE 1.0 (serv.man2) service manuals if exist.