SIGNATURE 1.0 (serv.man2) - Harman Kardon Audio User Guide / Operation Manual

signature 1.0 (serv.man2) user guide / operation manual
Model
SIGNATURE 1.0 (serv.man2)
Pages
10
Size
131.14 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Audio
File
signature-10-sm2.pdf
Date

Read Harman Kardon SIGNATURE 1.0 (serv.man2) User Guide / Operation Manual online

1.0 Pre-Amplifier
Owner’s Manual
Owner’s Manual
Signature 1.0 Pre-amplifier
Table of Contents
Unpacking
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
©1997 Harman Kardon, Incorporated
250 Crossways Park Drive,
Woodbury, NY 11797
www.harmankardon.com
Unpacking
The carton and shipping materials used to protect your
new 1.0 during shipment were specially designed to
cushion it from shock and vibration. We suggest that you
save the carton and packing materials for use in shipping
if you move or should the unit ever need repair.
To minimize the size of the carton in storage, you may
wish to flatten it. This is done by carefully slitting the tape
seams on the bottom and collapsing the carton down to a
more two-dimensional appearance. Other cardboard
inserts may be stored in the same manner. Packing
materials that cannot be collapsed should be saved along
with the carton in a plastic bag. 
If you do not wish to save the packaging materials, please
note that the carton and other sections of the shipping
protection are recyclable. Please respect the environment
and discard those materials at a local recycling center.
Typographic Conventions
In order to help you use this manual with diagrams of 
the remote control, front panel controls and rear panel 
connections, certain conventions have been used.
Example
– (bold type) indicates a specific 
remote control or front panel button, or rear panel
connection jack
1
– (number in a square) indicates a specific front 
panel control
a
– (number in an oval) indicates a button or indicator
on the remote
¡
– (number in a circle) indicates a rear panel connection
Safety Information
1
Signature 1.0
Important Safety Information
Verify Line Voltage Before Use
This Signature 1.0 has been designed for use with 
220-240-volt AC current. Connection to a line voltage
other than that for which it is intended can create a safety
and fire hazard, and may damage the unit.
If you have any questions about the voltage requirements
for your specific model, or about the line voltage in your
area, contact your selling dealer before plugging the unit
into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord attached
to your unit. We do not recommend that extension cords
be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets or place
heavy objects on them. Damaged power cords should be
replaced immediately with cords meeting factory
specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet,
always pull the plug, never pull the cord. If you do not
intend to use the unit for any considerable length of time,
disconnect the plug from the AC outlet.
Do Not Open The Cabinet
There are no user-serviceable components inside this
product. Opening the cabinet may present a shock hazard,
and any modification to the product will void your
guarantee. If water or any metal object such as a paper
clip, wire or a staple accidentally falls inside the unit,
disconnect it from the AC power source immediately, and
consult an authorized service station. 
Cleaning
When the unit gets dirty, wipe it with a clean, soft dry
cloth. If necessary, wipe it with a soft cloth dampened
with mild soapy water, then a fresh cloth with clean
water. Wipe dry immediately with a dry cloth. NEVER
use benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.
Installation Location
■ To assure proper operation, and to avoid the potential
for safety hazards, place the unit on a firm and level
surface. When placing the unit on a shelf, be certain
that the shelf and any mounting hardware can support
the weight of the product.
■ Make certain that proper space is provided both above
and below the unit for ventilation. If this product will be
installed in a cabinet or other enclosed area, make certain
that there is sufficient air movement within the cabinet.
■ Do not place the unit directly on a carpeted surface. 
■ Avoid installation in extremely hot or cold locations, or
an area that is exposed to direct sunlight or heating
equipment.
■ Avoid moist or humid locations.
■ Do not obstruct the ventilation slots on the top of the
unit, or place objects directly over them.
Moving The Unit
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and make
certain that you disconnect the unit from the AC outlet.
Declaration of Conformity
We, Harman Kardon Europe A/S
Kongevejen 194B 
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55 013/A12/8.1994
EN 55 020/12.1994
EN 55 022/5.1995
EN 61 000-3-2/4.1995
EN 61 000-3-3/1.1995
Steen Michaelsen
Harman Kardon Europe A/S
Birkerød. DENMARK. 1/99
Front Panel Controls
2
Signature 1.0
Front Panel Controls
)
1 2
3
7
5
6
#
8
9
4
!
@
Master Power: 
To turn the unit on, press this switch
in until it latches and is flush with the front panel. To turn
the unit off press in briefly, and the switch will pop out.
Once this switch is "ON" you may use the remote or
standby switch to turn the 1.0 on or off.
STANDBY:
Press to turn the unit on from Standby.
Press again to return to Standby. In order for this switch to
operate, 
Master Power 
1
must be "ON", as indicated by
the amber 
Standby LED 
5
.
3
Remote Sensor Window:
This sensor receives
commands from the infrared remote control. Make certain
that it is not blocked by cabinets, smoked glass or doors
or other objects that may interfere with the line of sight
from the remote.
4
Volume:
Turn to the right or left to raise or lower
volume. 
Do not block the motion of the knob, as it turns to
respond to the remote control commands.
5
Standby LED: 
When this indicator lights in an amber
color, the 1.0 is in Standby, ready to be turned on when
Standby 
2
, or the remote 
Power
a
is pressed. When
the 
Standby LED
is out, but the 
Power Indicator
6
is
illuminated in blue, the unit is on. When both indicators
are dark, the 1.0 is fully off, indicating that 
Master Power
1
is "OFF" or the 1.0 is not plugged into a live AC power
source.
Power Indicator:
This indicator is illuminated in blue
when the 1.0 is in full operation.
Source Selectors:
Press to select source.
Rec. Out:
Press to select the source from which you
want to record the audio signal. The yellow 
LED
!
will
flash until any of the 
Source Selectors
7
are pressed.
The green 
LED
#
below the pressed 
Source Selector
7
will light to indicate the selected record source. 
Mute:
Press to temporarily silence the audio output.
Press again to return to normal operation. When Mute is
activated, the feed to any recorders connected will remain
uninterrupted. When Mute is engaged the 
LED
@
lights
in a red color.
Source:
Row of LEDs. The LED above the audio
source selected for listening will light in a blue color.
This yellow LED will flash, until you have selected the
source you want to record from.
This LED will light in a red color when MUTE is
engaged.
Page of 10
Display

Download Harman Kardon SIGNATURE 1.0 (serv.man2) User Guide / Operation Manual

Here you can read online and download Harman Kardon SIGNATURE 1.0 (serv.man2) User Guide / Operation Manual in PDF. SIGNATURE 1.0 (serv.man2) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Harman Kardon SIGNATURE 1.0 (serv.man2) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.