MAS 100-110 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 13

                                                                      Page 13 of 54                           Report No. SH09061297-001 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.3.1 

Transformers and inductors marked with 
manufacturer's name and type .............................. :

Inductor: T1, T2, T3 
Transformer: T4, T5  
Dongguan  City   Dazhong   
Electronic Co., Ltd. 
T1, T2 type: SG08210 
T3 type: SG08049 
T4 type: SG08050 
T5 type: SG08048 

Pass 

 

Transformers and inductors separately approved . : No  

N/A 

14.3.2 General 

 

Pass 

14.3.3 Constructional 

requirements 

 

Pass 

14.3.3.1 

Clearances and creepage distances comply with 
clause 13 

(See table 13.3& 13.4) 

Pass 

14.3.3.2 

Transformers meet the constructional 
requirements 

 Pass 

14.3.4.1 

Class II transformers have adequate separation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

 Pass 

 

Coil formers and partition walls > 0,4 mm 

Transformer bobbin thickness 
at least 1.0mm. 

Pass 

14.3.4.2 

Class I transformers, with basic insulation and 
protective screening only if all 7 conditions of 
14.3.4.2 are met 

 N/A 

14.3.4.3 

Separating transformers with at least basic 
insulation 

 N/A 

14.3.5.1 

Class II transformers have adequate insulation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

 Pass 

 

Coil formers and partition walls > 0,4 mm 

Transformer bobbin thickness 
at least 1.0mm. 

Pass 

14.3.5.2 

Class I transformers have adequate insulation 
between hazardous live parts and accessible 
conductive parts or those conductive parts or 
protective screens connected to a protective earth 
terminal 

 

N/A 

 

Winding wires connected to protective earth have 
adequate current-carrying capacity 

 

N/A 

14.4 

High voltage components 

No high-voltage component. 

N/A 

 

High-voltage components and assemblies: 
U > 4 kV (peak) separately approved 

 N/A 

 

Component meets category V-1 of IEC 60707 

 

N/A