Read Harman Kardon GO PLAY MICRO (serv.man4) EMC - CB Certificate online
Page 17 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
4 PHYSICAL
REQUIREMENTS
P
4.1 Stability
P
Angle of 10
°
P
Test:
force (N).......................................................: The EUT mass is 0.3 kg
N/A
4.2 Mechanical
strength
P
4.2.1 General
P
4.2.2
Steady force test, 10 N
The EUT is still complying with
relevant requirements of this
standard after 10 N force is
applied to the components
relevant requirements of this
standard after 10 N force is
applied to the components
P
4.2.3
Steady force test, 30 N
No internal enclosure in the
sense of this standard
sense of this standard
N/A
4.2.4
Steady force test, 250 N
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
4.2.5 Impact
test
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
Fall
test
P
Swing
test
P
4.2.6 Drop
test
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
4.2.7
Stress relief test
84.8
°C, all the enclosure
materials listed in the table
1.5.1 are tested
1.5.1 are tested
P
4.2.8
Cathode ray tubes
No such device within the EUT
N/A
Picture tube separately certified ......................... : N/A
4.2.9
High pressure lamps
No such device within the EUT
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) .. : The EUT is not such equipment
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
The outer surface of the EUT is
smooth
smooth
P
Click on the first or last page to see other GO PLAY MICRO (serv.man4) service manuals if exist.