Read Harman Kardon GO PLAY MICRO (serv.man4) EMC - CB Certificate online
Page 11 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
Rated current (A), type and nominal thread
diameter (mm) .................................................... :
diameter (mm) .................................................... :
⎯
2.6.4.3
Separation of the protective earthing conductor
from protective bonding conductors
from protective bonding conductors
N/A
2.6.5
Integrity of protective earthing
N/A
2.6.5.1
Interconnection of equipment
N/A
2.6.5.2
Components in protective earthing conductors
and protective bonding conductors
and protective bonding conductors
N/A
2.6.5.3
Disconnection of protective earth
N/A
2.6.5.4
Parts that can be removed by an operator
N/A
2.6.5.5
Parts removed during servicing
N/A
2.6.5.6 Corrosion
resistance
N/A
2.6.5.7
Screws for protective bonding
N/A
2.6.5.8
Reliance on telecommunication network or cable
distribution system
distribution system
N/A
2.7
Overcurrent and earth fault protection in primary circuits
P
2.7.1 Basic
requirements
Integral part of equipment
P
Instructions when protection relies on building
installation
installation
N/A
2.7.2
Faults not covered in 5.3
N/A
2.7.3
Short-circuit backup protection
Building installation is
considered as the short-circuit
backup protection
considered as the short-circuit
backup protection
P
2.7.4
Number and location of protective devices ....... : One curent fuse (F1) is located
in the Line pole of primary
circuit
circuit
P
2.7.5
Protection by several devices
Only one protection device
N/A
2.7.6 Warning
to
service personnel............................. : The EUT is not such kind of
design
N/A
2.8 Safety
interlocks
N/A
2.8.1 General
principles
No safety interlock or similar
devices used within the EUT
devices used within the EUT
N/A
2.8.2 Protection
requirements
N/A
2.8.3 Inadvertent
reactivation
N/A
2.8.4 Fail-safe
operation
N/A
2.8.5 Moving
parts
N/A
2.8.6 Overriding
N/A
Click on the first or last page to see other GO PLAY MICRO (serv.man4) service manuals if exist.