Read Harman Kardon GO PLAY MICRO (serv.man4) EMC - CB Certificate online
Page 10 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
Regulating network limited output under normal
operating conditions and overcurrent protective
device limited output under single fault condition
operating conditions and overcurrent protective
device limited output under single fault condition
N/A
Output voltage (V), output current (A), apparent
power (VA)......................................................... :
power (VA)......................................................... :
See the Note below
⎯
Current rating of overcurrent protective device (A)
⎯
Note:
The output of the power supply complies with the requirement of inherently Limited Power Source.
Limits: Isc
≤ 8.0 A, VA ≤ 100 VA.
Measured Uoc = 25.6 Vdc, Isc = 3.70 A, VA = 86.3 VA, under max. overload at output (the worst case).
Limits: Isc
≤ 8.0 A, VA ≤ 100 VA.
Measured Uoc = 25.6 Vdc, Isc = 3.57 A, VA = 80 VA, under short R10.
Limits: Isc
≤ 8.0 A, VA ≤ 100 VA.
Measured Uoc = 25.6 Vdc, Isc = 3.60 A, VA = 81 VA, under short D1.
Limits: Isc
≤ 8.0 A, VA ≤ 100 VA.
Measured Uoc = 25.6 Vdc, Isc = 3.70 A, VA = 85.8 VA, under short R24.
Limits: Isc
≤ 8.0 A, VA ≤ 100 VA.
Measured Uoc = 25.6 Vdc, Isc = 3.70 A, VA = 85.5 VA, under short R16.
2.6
Provisions for earthing and bonding
N/A
2.6.1 Protective
earthing
Class II equipment
N/A
2.6.2 Functional
earthing
N/A
2.6.3
Protective earthing and protective bonding
conductors
conductors
N/A
2.6.3.1 General
N/A
2.6.3.2
Size of protective earthing conductors
N/A
Rated current (A), cross-sectional area (mm
2
),
AWG ................................................................... :
⎯
2.6.3.3
Size of protective bonding conductors
N/A
Rated current (A), cross-sectional area (mm
2
),
AWG ................................................................... :
⎯
2.6.3.4
Resistance (
Ω) of earthing conductors and their
terminations, test current (A) .............................. :
N/A
2.6.3.5 Colour
of insulation............................................. :
N/A
2.6.4 Terminals
N/A
2.6.4.1 General
N/A
2.6.4.2
Protective earthing and bonding terminals
N/A
Click on the first or last page to see other GO PLAY MICRO (serv.man4) service manuals if exist.