GO AND PLAY (serv.man4) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 126

Read Harman Kardon GO AND PLAY (serv.man4) EMC - CB Certificate online

 
 
<12007721 001> 
 
 
Page 29 of 102 
 
IEC 60950 / EN 60950 
Clause 
Requirement 
 Test 
Result – Remark 
Verdict 
 
TRF No.: IECEN60950A 
 
TRF originator: SGS FIMKO 
2.10.3.2 
Clearances in primary circuits 
(see appended table 2.10.3 
and 2.10.4) 
2.10.3.3 
Clearances in secondary circuits 
See 5.3.4. 
2.10.3.4 
Measurement of transient levels 
No transient voltage across 
the clearance lower than due 
or normal. 
2.10.4 
Creepage distances 
(see appended table 2.10.3 
and 2.10.4) 
 
CTI tests ............................................................... :  CTI rating for all materials of 
min. 100. 
 
2.10.5 
Solid insulation 
See below. 
2.10.5.1 
Minimum distance through insulation 
See appended table 2.10.5. 
2.10.5.2 
Thin sheet material 
Used on secondary heatsink 
(HS2) and transformer (T1). 
 
Number of layers (pcs) ......................................... :  See appended tables 2.10.3, 
2.10.4 and C.2. 
 
 
Electric strength test 
See appended tables 5.2. 
 
2.10.5.3 
Printed boards ...................................................... :   
 
Distance through insulation 
 
 
Electric strength test for thin sheet insulating 
material  
 
 
 
Number of layers (pcs) ....................................... :   
2.10.5.4 
Wound components.............................................. :  Certified triple insulated wire 
used in T1.  
 
Number of layers (pcs) ....................................... :  3 layers. 
 
Two wires in contact inside component; angle 
between 45
°
 and 90
°
 
Mechanical stress reduced by 
insulation tape and tubing. 
2.10.6 
Coated printed boards 
 
2.10.6.1 
General 
 
2.10.6.2 
Sample preparation and preliminary inspection.. :   
2.10.6.3 
Thermal cycling..................................................... :   
2.10.6.4 
Thermal ageing (°C) ............................................. :   
2.10.6.5 
Electric strength test 
 
 
2.10.6.6 
Abrasion resistance test ....................................... :   
 
Electric strength test 
 
 
2.10.7 
Enclosed and sealed parts ................................... :  No hermetically sealed 
component. 
Page of 127
Display

Click on the first or last page to see other GO AND PLAY (serv.man4) service manuals if exist.