Read Harman Kardon AVR 355 (serv.man6) EMC - CB Certificate online
- Page 41 of 42 -
Report No. 98388
ZB
ANNEX ZB TO EN 60 065, SPECIAL NATIONAL CONDITIONS
2.6.1
DK: certain types of Class I apparatus, see 15.1.1,
may be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
may be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
Class II apparatus
N/A
13.3.1
NO: In Norway, due to IT power distribution system
used, the a.c. MAINS supply voltage is considered to
be equal to the line-to-line voltage, and will remain
230V in case of a single earth fault.
used, the a.c. MAINS supply voltage is considered to
be equal to the line-to-line voltage, and will remain
230V in case of a single earth fault.
Class II apparatus
N/A
15.1.1
DK: mains cord for single-phase equipment having a
rated current not exceeding 10 A shall be provided
with a plug according to Heavy Current Regulations
Section 107-2-D1
rated current not exceeding 10 A shall be provided
with a plug according to Heavy Current Regulations
Section 107-2-D1
P
DK: Class I equipment with socket-outlets with
earthing contact, or which are intended to be used in
locations where protection against indirect contact is
required shall be provided with a plug in compliance
with Standard Sheet DK 2-1a
earthing contact, or which are intended to be used in
locations where protection against indirect contact is
required shall be provided with a plug in compliance
with Standard Sheet DK 2-1a
Class II apparatus
N/A
DK: socket-outlets for providing power to Class II
equipment with a rated current of 2,5 A shall have
dimensions according to the drawing on page 179 of
EN 60 065:2002 other dimensions shall be to
IEC 60 083 Standard Sheet C 1a for portable socket-
outlets
equipment with a rated current of 2,5 A shall have
dimensions according to the drawing on page 179 of
EN 60 065:2002 other dimensions shall be to
IEC 60 083 Standard Sheet C 1a for portable socket-
outlets
P
DK: mains socket-outlets with earthing contact shall
comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a
comply with Heavy Current Regulations
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a
Class II apparatus
N/A
GB: equipment fitted with a flexible cable or cord
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
provided with a 13A BS 1363 plug as in Statutory
Instrument 1768:94
BSI approved plug and cord
provided
provided
P
IE: equipment fitted with a flexible cable or cord
provided with a 13 A plug in accordance with Statutory
Instrument 525:97
provided with a 13 A plug in accordance with Statutory
Instrument 525:97
When marketing in Ireland,
the apparatus must be supplie
d with a cord and plug
acceptable in Ireland.
the apparatus must be supplie
d with a cord and plug
acceptable in Ireland.
N/A
NO: mains socket-outlets on Class II equipment meet CEE Publication 7 with the
following amendments:
following amendments:
P
- dimensions 2,5 A, 250 V socket-outlets shall comply
with Standard Sheet I page 180 of EN 60 065:2002
with Standard Sheet I page 180 of EN 60 065:2002
Comply.
P
- mechanical strength 2,5 A, 250 V socket-outlets
tested as specified in EN 60 065, 12.1.3
tested as specified in EN 60 065, 12.1.3
Comply.
P
- protecting rim also tested
Class II apparatus.
N/A
NO: method b) of 8.1 is not permitted. Double or
reinforced insulation is required between parts
connected to the mains and parts connected to the
public telecommunications network
reinforced insulation is required between parts
connected to the mains and parts connected to the
public telecommunications network
No TNV circuits
N/A
Click on the first or last page to see other AVR 355 (serv.man6) service manuals if exist.