JMECHA - Sony VCR Service Manual (repair manual). Page 20

— 20 —

1)

Confirm that the brake-T block assy has been moved in the
counter-clockwise direction C.  While pressing the TG7 block
in the direction of the arrow D, insert the LS guide shafts T1
and T2 of the LS chassis block assy into the slots of the
mechanism chassis with slanted angle.

2)

While inserting the LS arm dowel into the LS cam plate groove,
insert the LS guide shafts S1 and S2 into the slots of the LS
chassis block assy as shown.

3)

Insert the LS guide retainer from the top, align it with the LS
guide shafts S1 and S2 and fix it with the screw (M1.4 

×

 2) 1.

Tightening torque: 0.059 to 0.01 N•m (0.6 kg•cm).

4)

Confirm that the LS guide retainer has play, is not lifted up, is
not installed in opposite direction and has not been deformed.

5)

Attach the E-type stop ring 1.5 3 into the LS guide shaft T1.

6)

Insert the FPC holder into DC motor (capstan) in the direction
of the arrow E and fix it with the screw (M1.4 

×

 2.5) 2.

7)

Connect the flexible wiring board coming from the FP-100
flexible wiring board into the FPC connector.

3

1

×

2

×

A

C

B

D

E

1)

Remove the FP-100 flexible wiring board from the FPC
connector on the FP-102 flexible wiring board.

2)

Remove the screw (M1.4 

×

 2.5) 2.  Remove the FPC holder

from DC motor (capstan).

3)

Remove the two screws (M1.4 

×

 2) 1.

4)

Remove the LS retainer in the direction of the arrow A on the
top.

5)

Remove the E-type stop ring 1.5 3.

6)

Remove the LS chassis block assy in the direction of the arrow
B

.