Read Sony JMECHA Service Manual online
— 21 —
3-13.LS Cam Plate, Tension Coil Spring (Brake-S), Brake-S,
Torsion Coil Spring (Brake Arm), Cassette Position Set-S,
Brake-S Driving Arm Assy
Brake-S Driving Arm Assy
1.
Removal procedure
1)
Remove the screw (M1.4
×
1.4) 1.
2)
Remove the LS cam plate.
3)
Remove the tension coil spring (brake-S).
4)
Remove the brake-S.
5)
Remove the screw (M1.4
×
2) 2.
6)
Remove the torsion coil spring (brake arm).
7)
Remove the cassette position set-S from groove of the LS block
assy in the direction of the arrow A.
assy in the direction of the arrow A.
8)
Remove the brake-S drive arm assy from groove of the LS
block assy in the direction of the arrow B.
block assy in the direction of the arrow B.
2.
Attachment procedure
1)
Insert the brake-S drive arm assy under groove of the LS chassis
block assy. Attach the brake-S drive arm assy to the brake-S
arm shaft and to the brake-S pivot shaft.
block assy. Attach the brake-S drive arm assy to the brake-S
arm shaft and to the brake-S pivot shaft.
2)
Insert the cassette position set-S under the groove of the LS
chassis block assy. Attach the cassette position set-S to the
brake-S arm shaft.
chassis block assy. Attach the cassette position set-S to the
brake-S arm shaft.
3)
Attach the torsion coil spring (brake arm).
4)
Attach the screw (M1.4
×
2) 2 to the brake-S arm shaft.
5)
Attach the brake-S to the brake-S arm bearing and to the brake-
S pivot shaft.
S pivot shaft.
6)
Hook the tension coil spring (brake-S) to the spring stay of the
cassette position set-S and the spring stay of the brake-S.
cassette position set-S and the spring stay of the brake-S.
7)
Align the slot of the LS cam plate with the dowel. Move then
in the direction toward the arrow C and attach the screw (M1.4
in the direction toward the arrow C and attach the screw (M1.4
×
1.4) 1.
8)
Perform the LS cam plate position adjustment referring to
section 3-11.
section 3-11.
Fig. 3-13
LS cam plate
Tension coil spring
(brake-S)
(brake-S)
Tension coil spring (brake-S)
Brake-S drive arm assy
Brake-S
Torsion coil spring (brake arm)
Cassette position set-S
2
Screw (M1.4
×
2)
Screw (M1.4
×
2)
1
Screw (M1.4
×
1.4)
1
Screw
(M1.4
×
1.4)
Cassette position set-S
Cassette position set-S
Brake-S
Brake-S drive arm assy
LS cam plate
LS chassis block assy
Torsion coil spring (brake arm)
Insert the brake-S drive arm
assy under groove of the LS
chassis block assy.
assy under groove of the LS
chassis block assy.
Brake-S arm shaft
Brake-S pivot
shaft
shaft
Dowel
Dowel of LS chassis
block assy
block assy
Insert the cassette position
set-S under the
groove of the LS
chassis block assy.
set-S under the
groove of the LS
chassis block assy.
A
B
B
C
C
Click on the first or last page to see other JMECHA service manuals if exist.