Read Sony KV-SZ252M50 (serv.man3) Service Manual online
– 8 –
KV-SZ252M50/M91
RM-GA002
2-4. Dressing of Conn Assy, 4P VH
Dress Conn Assy, 4P VH into hook as shown.
Right side
Left side
2-5. Dressing of Conn Assy, 5P YUV
Dress Conn Assy, 5P YUV around shield case.
Use pin, wires A019 and A017 to dress Conn Assy,
5P YUV as shown.
Use pin, wires A019 and A017 to dress Conn Assy,
5P YUV as shown.
CN007
CN9201
Make sure the UL tape is positioned at
the sharp edge of shield case to prevent
wire from being scratched
Dress Conn Assy, 5P YUV
around shield case
Keep wires away
from R121
CN905
Pin, wire A019
Pin, wire A017
Conn Assy, 5P YUV
2-7. Installation and Dressing of Earth Assy
Coating
i) Earth Assy, Coating is installed as shown.
2-6. Dressing of Conn Assy, 4P VM and
Connector Assy, 5P Front In
Dress Conn Assy, 4P VM behind Conn Assy, 5P Front In
as shown.
Conn Assy, 5P Front In is used to prevent Conn Assy,
4P VM from bending towards T504, R579 and R5032
(high temperature parts).
as shown.
Conn Assy, 5P Front In is used to prevent Conn Assy,
4P VM from bending towards T504, R579 and R5032
(high temperature parts).
CAUTION:
Keep Conn Assy, 5P Front In away from deflection area
(T504, R5032, etc.) when dressing.
Keep Conn Assy, 5P Front In away from deflection area
(T504, R5032, etc.) when dressing.
Dress Conn Assy, 4P VM behind
Conn Assy, 5P Front In
Lead Assy, Earth is
above Conn Assy, 5P
Conn Assy, 5P
Front In
Deflection area
T504
R5032
CN003
CN9201
R579
Conn Assy, 4P VM
Insert Connector Assy,
4P VH into holder
CN6101
CN4102
Click on the first or last page to see other KV-SZ252M50 (serv.man3) service manuals if exist.